01.September.2016
Ontoscopes Further steps
We found an interesting material for a special model series of our Ontoscopes.
intelliTablet Further steps
We found an interesting material for a special model series of our intelliTablets.
iRaiment Further steps
We designed a new device series.
02.September.2016
iRaiment Further steps
We developed a third basic variant of the new smartband or smartstrap mentioned in the Further steps of the 31st of August 2016.
We also designed another new model with the Cyberdan complementing one of our series with minimalistic design (see also the Further steps of the 25th of January 2015, 29th of February 2016, and 31st of August 2016).
© Danish Design and iRaiment
We are beginning with our third campaign for the worldwide
longest running,
flatest,
most beautiful,
etc., etc., etc.
Ontowatch or wrist-worn Ontoscopes, aka. wrist-worn computers and smartwatches.
03.September.2016
Ontonics Further steps
While thinking about one of our high-performance solutions, we remembered some materials, which might be suitable for its realization because of their outstanding qualities.
iRaiment Further steps
We would like to present some sketches of Ontoscope models
CyberQ,
El Compadre,
Cyberlysee I, II, and III,
Cyberneo,
Cyberbird,
Cybercore Ultra Thin,
Cybermoon,
Cyberplano IB,
Cybersnow, and
Cyberplano II or DD,
that complement our Ultra Thin, Ultra Slim, or Ultra Flat series (see also the Further steps of the 2nd of December 2015 and yesterday), which also is part of the signature multimedia work of art series titled "Ontoscope" and its subseries "Schwarzer Kreis==Black Circle" created by C.S..
© Weide, Compadres, Elysee, Neos, Tianjin Sea-Gull, Wwoor, Mondaine, :I, Snobi, Danish Design, and iRaiment
04.September.2016
iRaiment Further steps
We designed new model for our Ultra Thin, Ultra Slim, or Ultra Flat series of smartwatches and Ontoscopes.
Style of Speed Further steps
We would like to show some quick doodles of a conversion respectively model about which we are thinking since several weeks.
© :I, :I, and Style of Speed
05.September.2016
iRaiment Further steps
We are thinking about the option to manufacture components of our wearable Ontoscopes together with an automotive supplier.
The revolution continues at iRaiment. Where else?
Our latest estimation of the battery capacity of our Ontowatches has overcome the 3,000 mAh limit, which translates after the company Masgnus to at least 3000mAh/380mAh*4 days=31.6 days.
But this is only the prolog, aka. the beginning. In fact, we are heading to add 5 times and later 10 times more battery capacity, as promised, explained, and announced in the past.
Style of Speed Further steps
Somehow, we continued the discussion about the conversion mentioned the first time yesterday and made some more doodles.
© :I, :I, and Style of Speed
Schöne Tüten.
06.September.2016
iRaiment Further steps
We continued the work on 1 more already existing design of a smartwatch and Ontowatch model.
07.September.2016
Clarification
The lessons of the past showed that we have to make a clear cut: If a company wants to work together with us, then it has to stop the production, marketing, and branding of competing products and services. Either partnering company is a supplier or/and an assembler, or it is a competitor, but definitely not both.
We are already looking for and will find individual agreements with single companies that are interested.
Furthermore, in relation with feature-watches, smartwatches, wrist-worn computers, and Ontoscopes we are applying the following rules since the beginning, as our record and product range prove:
The classic watch designs, specifically the watchcases and watchfaces, are reserved for the original watchmakers that work together with us or for us if an original watchmaker is not interested in such mobile devices.
We do not accept copycats, bandwagon jumpers, and entities that only dilute or/and mix the classic watch designs to confuse the public and steal our work in this case.
It has become that simple now.
Ontonics Further steps
We are ramping up the presentation of the first devices for the next internet, the next World Wide Web WWW 4.0, and the next realitiy, our original and unique (copyrighted) Ontologic Net (ON), Ontologic Web (OW), and OntoVerse (OV), which fusion Artificial Intelligence (AI) and Mixed Reality (MR; includes Augmented Reality (AR) and Virtual Reality (VR)). See also the iRaiment Further steps of the 9th and 27th of August 2016, and 2nd of September 2016.
We are net
We also worked on a new model of our Reactor system, which should be more scalable, modular, and easier producible, and in this way more flexible in its application and price effective.
iRaiment Further steps
We continued with the presentation of models of our subseries Ultra Thin, Ultra Flat, or Ultra Slim of the Ontoscope subseries "Black Circle" (see also the Further steps of the 3rd of September 2016), which includes the following models:
Cybersky
Le Constantine 1003, 6115, 6351, 33093, 34070, and 39005, and
Cyberdate.
The images below show first sketches.
© Skogen, Vacheron & Constantin, Tissot, and iRaiment
A nice anecdote in relation with the model series Ultra Flat or Ultra Fine of the watchmaker Vacheron & Constantin is the following:
The first model was so flat that it bent so much when the wristband was tightened too much, that as a consequence the gears of the caliber were stopped by coming together with the inside of the watchcase. Later the caliber was put into a case made of titanium.
We also would like to show another variant of the Spacetimer III (see also the Further steps of the 25th of February 2016) with the bezel and potentially the crown of the model Superocean Héritage of the watchmaker Breitling.
The image below shows a first sketch.
© Breitling and iRaiment
In addition, we also show 2 new smartwatch and Ontoscope models called Cybermarine and Cybermarine Cybergraph.
The images below show first sketches.
© Ulysse Nardin and iRaiment
Nobody is left behind.
We also continued the work on an already existing design of a smartwatch and Ontowatch model.
We have also designed a new smartwatch and Ontowatch model.
Furthermore, we are thinking about 2 new models that are related with nice models of the watchmakers Swatch→Tissot (for example the models PRC 200 and T-Race), Seiko, and Citizen.
Roboticle Further steps
We worked on a model to start its prototyping and production phases. This machine has the potential to become a huge hit.
We also designed another model that is based on the same technology.
Style of Speed Further steps
We began the development of a special variant of one of our automobile models.
08.September.2016
Comment of the Day
Smart bandolier
Smart bandoleer
Smart sling
OntoLix and OntoLinux Further steps
We have composed the first generation of our basic application stack for smartwatch and Ontoscope models of our business partners and our business unit iRaiment. The applications cover a brought range of functions, specifically the ones that have been demanded by the customers. It might run a little rough in the beginning, but any issue will be solved virtually instantly.
We will presented it in the next days as part of the promotions for our announced mobile device campaigns.
iRaiment Further steps
We continued the work on the design of our new model Cybercord I. See also the Thin Watch I presented in the iRaiment Further steps of the 19th and 20th of July 2016.
© Concord and iRaiment
Furthermore, we continued the work on another already existing design and created a new design of smartwatch and Ontowatch models, which belong to the same series as the model mentioned in the Further steps of the 6th of September 2016.
We also continued the work on 2 more already existing designs of smartwatch and Ontowatch models, which belong to the same series as the new model mentioned in the Further steps of the 7th of September 2016.
We also designed 2 new smartwatch and Ontoscope models, which combine our Double Watch series (see the iRaiment Further steps of the 20th of March 2016, and 25th and 26th of May 2016) and our Ultra Thin, Ultra Slim, or Ultra Flat series, and also the Thin Watch II (see above).
In addition, we worked also on the first production model of our Ontoscope data glasses, which should not be confused with the devices of our OntoLab and iRaiment Open Glasses project (see for example its issue #13 publicated on the 21st of July 2016).
The image shows a model made by another company, which we have overworked already for example by transforming it into a pair of stereo glasses respectively 3D glasses (second projector on the left side is covered by the temple ;D).
© :I, Ontoscope, and iRaiment
"We don't wear Ontoscope glasses to see the space.
In fact, we never cleaned it.
We wear an Ontoscope because it's the glasses to wear.
[C.S., Today]
We are sure that it is needless to say that we already integrated our data glasses with our original and unique
Smart Necklaces,
Smartsnakes (e.g. iRaiment Serpent and Ontoscope Snake models),
Smartscarfs,
Smart Neckpieces or Smart Necksets, as well as
Smart Gears (e.g. X Harness and Hero Gear models),
Smart Bandoliers or Smart Slings,
Smart Backpacks (e.g. Little Black Backpack models),
and so on
as part of the multimedia works of art project MultiCouture of C.S..
And we hold it with these devices listed above in the same way as with the smartwatches: If you are not our friend, then ...
Finally, we developed another basic technology for a device.
09.September.2016
Clarification
In relation with the Clarification of the 7th of September 2016 we would like to add the following informations:
1. From our point of view, single designs in the classic style of our wrist-worn Ontoscopes or Ontowatches, also wrongly called smartwatch for easier communication with the public, are protected by the copyright in relation with the signature multimedia work of art series(==Signatur-Kunstwerkserie)
- "Ontologic System", specifically its Calibre/Caliber, and
- "Ontoscope", specifically its subseries "Schwarzer Kreis==Black Circle" and "Schwarzes Quadrat==Black Square" of wrist-worn Ontoscopes (see the excerpt below),
all created by C.S.. This leads us to the second point.
2. Most potentially, this copyright protection or more precisely the acknowledgement of each single device design as a work of art will be discussed at the highest courts at first, though we always say that a single device design belongs to the complete signature series, which leads us to the third point.
3. But when it comes to more than one copy, as seen in the last months by the companies Fossil and Samsung for example, then the copyright of the whole series of wrist-worn "Ontoscopes" with its whole subseries "Schwarzer Kreis==Black Circle" or "Schwarzes Quadrat==Black Square" is infringed, which obviously is a different kind of copyright infringement than a copyright infringement in relation with a single device design.
By the way:
- For an infringement of a copyright in general with a single work it is enough if only a part of an original and unique work has been copied without a conceptual transformation, which means taking a different case or bezel, a so-called 'flat tire' display, or a left crown or knob is not enough to create an own original and unique work with a new individual expression.
- For an infringement of a copyright in particular with a work series, which constitutes a single work on an upper metalevel so to say, it is enough to do it more than one time even if each copying of a single part is legal.
This leads us back to the first point.
© Many :), Ontoscope, and iRaiment
The image is not correct, because the model Subspacer II should be Subspacer I Cybergraph having a crown and two knobs (see the iRaiment Further steps of the 22nd and 23rd of May 2016), and the model Subspacer III has the original title Subspacer II Cybergraph. Choosing these images and titles was done for a specific reason.
In addition, there are several aspects in relation with the law against unfair competition.
As it can be seen and has been told by us, our legal teams are really working already. Said this, it is safe to say and recommend at this time actually, that our beloved competitors
should not take our designs of wrist-worn computers in the classic style in whole or in part, and instead
should take down all (partial) copies from the market immediately
in their own interests.
iRaiment Further steps
We developed 7 more smartwatch and Ontowatch models.
We also developed 6 more smartwatch and Ontowatch models.
10.September.2016
Original
Wenn plötzlich Kunst entsteht.==When art is being created suddenly.
© :(
What another great performance. We love the concept, its execution, and the result with its colors.
See also the performance shown as an Original on the 23rd of July 2016.
iRaiment Further steps
We continued the work on 1 more already existing design of a smartwatch and Ontowatch model, which belongs to the same series as the models mentioned in the Further steps of the 6th and 8th of September 2016.
Style of Speed Further steps
We continued the work on the design of the U.S.American model Cade of our muscle car series Hot Rings (see the related Further steps of the 1st of December 2014, 30th of June 2016, and 16th of August 2016). Specifically the front and the rear sections have been overworked and are looking even more keener.
In addition, we also optimized the chassis and other exterior elements, which are much better now.
Investigations::Multimedia, AI and Knowledge management
Apple: Finally, the company Apple broke the copyright in relation of the multimedia work of art titled Ontoscope and created by C.S. officially.
At first we have not seen the issue so clearly, because the presentation of the newest products of Apple was so calm and without any obvious, serious, and relevant friction with our works. This could be seen for example by the way how the issue has been camouflaged by the two messages that
an Augmented Reality (AR) application of the company Nintendo is running on the smartwatch of Apple and
a game around the figure Super Mario for the newest smartphone of Apple is in development by Nintendo.
See also the iRaiment Further steps of the 27th of June 2016 for the relations with some of our original and unique works.
But our latest investigation showed that the problem is not that the company Apple is offering a model of a new smartphone series powered by an operating system, for which it already
has taken the Intelligent Personal Assistant (IPA) from one realization of the other relevant multimedia work of art titled Ontologic System (abbreviated as OS), which is our OS OntoLinux, and also
offers at least one AR application (e.g. that AR application of Nintendo mentioned above) in its application store,
but that in addition said smartphone model has a dual-lens camera.
In this specific constellation it even does not matter if this dual-lens camera is a 2D camera or a stereoscopic 3D camera or has only one imaging sensor, because the two lenses are enough and such a digital camera has already depth of field and depth of focus func- tionalities (simultaneous near and far zoom capture of a 2D image), which are spatial or 3D capabilities.
Because we already proved with our many investigations that the company is acting by the top-down approach (see also the Clarification of the 2nd of July 2016) and we also created the single original and unique items with the software components of the OS and on the other hand the Ontoscope on the one hand and their integration to another original and unique system on the upper metalevel with the whole Ontologic System (see also the similar discussion in relation with smartwatches and Ontowatches in the Clarification of the yesterday), we have now the first official and documented copyright infringement in relation with the Ontoscope of C.S. powered by our OS by default, because for an infringement of a copyright it is enough if only a part of an original and unique work, for example two beats, two pixels, or two camera optics, or an important integration or connection of two simple items, is copied without creating an own original and unique work.
The same holds for every other manufacturer of mobile devices, that features a dual-lens camera and has installed the operating system Android with the proprietary functional extensions including an IPA, AR functionality, etc. of the company Google (e.g. smartphones of the companies Huawei and LG Electronics).
Besides this, Apple also copied from our Double Watch No. 1 the double strap wristband (see the iRaiment Further steps of the 20th of March 2016).
Clever but not clever enough, because we only waited for such an evidence that lets bust the strategy. In fact, the whole strategy has absolutely no prospect of success, because so much is missing on both the hardware side and the software side at the other companies.
Furthermore, at this point we have not discussed the many issues related with illegal because unfair competition, which could even lead to removing one or more patents from the register if they block our activities in relation with said multimedia works of art.
11.September.2016
♥
12.September.2016
Ontonics Further steps
In the last days, we continued the work on our new model of our Reactor system (see the Further steps of the 7th of September 2016) and find a direction that fulfills our requirement specification. It already looks very good and outperforms
actual electric power generators based on combustion engines and fuel cells in relation with efficiency and size on the one hand and
large batteries in relation with handling and for sure size and weight by far on the other hand.
Even better, the solution seems to be an invention that is eligible for patenting, as far as we can see.
We also began to look at details and optimizations and in the course of this we found out that we have integrated another technology on the one side and on the other side developed new models of two other technologies.
In addition, we also continued to develop special variants of our Reactor system and one of the other technologies.
Roboticle Further steps
We designed 4 more new models of a device (see the related Further steps of the 7th of September 2016).
For an important component of this device we were also able to find a simple but nevertheless elegant solution.
In addition, we constructed a specific module, which might become useful.
Style of Speed Further steps
We also worked on the integration of the newest (Active) Reactor developed together with Ontonics (see the Ontonics Further steps of today) into the related models.
13.September.2016
Ontonics Further steps
We have started the prototyping phase of our newest propulsion system for airliners, which will revolutionize aviation.
In fact, we are already looking for a test aircraft and manufacturers for the serial production of aircrafts.
Ontonics Super Warrior #7
We have estimated the performance of the first generation of our energy storage device for our ground and air soldier system platform named Super Warrior or Max Warrior and would like to give some more informations in addition to the informations given before in the issue #5 of the 14th of November 2015:
> 3.5 times more stored electric energy and
> 10 times lighter than common batteries.
For our readers, who do not know what the Super Warrior platform is, we have listed all issues publicated so far:
#1 3rd of November 2015
#2 6th of November 2015,
#3 10th of November 2015,
#4 11th of November 2015,
#5 14th of November 2015, and
#6 15th of December 2015.
In addition, we would like to point to the iRaiment Further steps of the 1st of July 2016.
But we also thought about further ways how we can support the main actors in the theaters. One examplary result of these considerations is a special version of a supplementary Unmanned Aerial Vehicle (UAV), also called a Personal Reconnaissance System (PRS), which we developed together with our business unit Roboticle. Read the related Roboticle Further steps of today for getting more informations.
Roboticle Further steps
Together with our business unit Ontonics we developed a special version of an Unmanned Aerial Vehicle (UAV) in the course of its project Super Warrior (read the issue #7 of the Ontonics Super Warrior of today), which is also called a Personal Reconnaissance System (PRS) and we have mentioned but not disclosed before.
The images below show a PRS constructed as a helicopter by another company, which has a basic design of such a micro UAV on the one hand and on the other hand has been overworked completely by us.
© Philip Ide and :( (British Armed Forces?)
Below we list some specification data for the first generation:
general:
image sensor: Ontoscope
microcontroller: top secret
software: Ontologic System
range: > 3.5 km or 2 mi
endurance: 110 minutes
reloading time: < 3 seconds
recharging time: N.A.
procurement costs: Talk to us for price and barter options.
In fact, this is our second UAV of the micro class and we like the reliability and maturity of the helicopter technology, but not its filigree character (new word for you filigreety). This said, we will disclose at another time the third small UAV and a fourth UAV, which provide special features or/and higher performances. For the time being, see also the related Roboticle Further steps of the 25th and 30th of March 2015 and 8th July 2016 which are about the first UAV.
14.September.2016
Ontonics Further steps
When working on the special variants of our Reactor system and another system mentioned before, we remembered a component that others and we use in a different way, which is problematic in its actual state of development. But when we apply this component in the before not imagined way, then the problems cannot occur at all, because of the foundation and the realization of this other usage.
The original usage was already a little revolution, but our new approach also provides a specific energy of around 35,000 Wh/kg (see also the Further steps of the 18th of October 2015 and the Style of Speed Further steps of the 7th of July 2016 for example).
That said, this technology is short before being exhausted, which means further improvements to get the last percents of efficiency will become more and more expensive on the one hand and make alternatives more interesting and promising on the other hand.
Ontonics, Roboticle, and Style of Speed Further steps
We asked C.S. for designing a multirotor helicopter or multicopter, specifically a quadrocopter. But what C.S. presented instead is beyond our expections and belongs straight into the C.S. Collection or another museum, when one of our older signature technologies, the Ring Fan already developed sometimes ago in the OntoLab, was taken to create an original and unique signature Quadrovector series of minimalistic Unmanned Aerial Vehicles (UAV).
Consequently, we called this type the Safety Drone, because no rotor or blade is exposed to the outside and therefore absolutely no danger of getting hurt by having contact with a high spinning part is given, obviously. See also our Multivector models in the of the 23rd of December 2013.
Another interesting component of the propulsion system are the high-performance Active Motors of Style of Speed.
© :(, :(, :(, and C.S.
Needless to say that we already developed models with this propulsion system for our Delivery Drone systems/technologies on the one hand and with our (Active) Reactor technologies/systems on the other hand.
iRaiment Further steps
We beautified the image of the second model of our Serpent series presented in the Further steps of the 25th of June 2016 and gave it the designation Serpent Tubogas I Small.
In addition, we created an image of the proposed variant with a larger display titled Serpent Tubogas I Large accordingly. At first, this model looks a little odd, but when worn on an arm and changing back to the small model, then it is the latter that looks unusual.
© Bulgari and C.S.
We also created an image of the Serpent et Tubogas I Large (see also the Further steps of the 26th of June 2016).
© Bulgari, :I, and C.S.
We will also try the medium size with this amount of coils and one coil less.
At this point we would like to recall that we already mentioned our smartband, -strap, or -belt, which includes the variants in leather, rubber, and other soft materials, and our Flip-Flop technology in relation with our Smartsnake series Serpent and Snake of iRaiment and Ontoscope.
15.September.2016
Comment of the Day
Safety drone
Clarification #1
One important point in relation with the protection of a work by the copyright is if it describes an ordinary technological progress or not.
We discussed and thought about this specific point in the last days once again, specifically in relation with the original and unique multimedia work of art titled Ontoscope of C.S..
In the end, we also come to the conclusion that the development of mobile devices, such as the mobile phone or cell phone, was not foreseeable in this direction respectively in such a bottom-up evolution. In fact, around the years 2007 and 2008 and before only the transition from the mobile phone to a device with a touchscreen that is called a smartphone now could be observed. This is also reflected by the operating systems that at that time were derived from the Unix operating system and extended by a special mobile telephony stack, which provided functions focused on communica- tion and handling a telephone. Even the integration of the digital camera with its advanced features was described only by our Ontoscope.
By the way: The same holds for everything related with the integration of cloud computing and automotive computing, e.g. the
Hyper Connectivity technologies including AutoCloud of our business unit Style of Speed.
We have made a list of interesting sources of information:
Clarification of the 1st of May 2016,
Clarification of the 8th of May 2016,
Article I, Section 8, Clause 8 of the United States Constitution discussed on the 9th of May 2016,
etc..
Also, keep in mind the effect of improper hindsight.
Clarification #2
In the last past we saw that some more companies took elements of the multimedia works of art titled Ontologic System (OS) and Ontoscope and created by C.S. to set up own network and cloud computing respectively distributed computing based services, which is also a feature of our OS.
These comprise for example a SpeechCloud and even a service for cognitive functions.
But specifically problematic are the
integration of such distributed applications with other hardware and software items, as we discussed several times in relation with the Augmented Reality (AR) and Virtual Reality (VR) techniques respectively our Mixed Reality (MR) continuum, for example when an application programming library is provided, and
using of a copyrighted work as blueprint and copying it in whole or in part following the illegal top-down approach, which constitutes a copyright infringement due to the reason that these multimedia art works Ontologic System (OS) and Ontoscope are original and unique, and because the technological progress in general and the World Wide Web 4.0 in particular were not foreseeable by a person skilled in the art, but described and therefore created precisely by C.S..
In relation with some of said distributed computing based services it cannot be seen clearly if the responsible entities apply a bottom-up or a top-down approach, but for example in the case of the companies Apple, Google, and Microsoft this is always given since some months, while for example in the case of the company Amazon we have to wait a little longer until an infringement of our copyrights can be proven.
At this point we would like to remember the issue with related patents, because in the case of a copyright infringement we have also an infringement in relation of unfair competition, e.g. they constitute an illegal impediment of our business development, which even allows us to demand the removing of said patents from the register.
Ontonics Further steps
We have developed a first concept of a large-scale production process for our Graphene Quantum dot Light-Emitting Diode (GQLED) display.
In relation with another device and in contrast to our expectations we could not find a specific module that fulfills all points of our requirement specification, so that we are thinking about constructing and producing this module on our own.
Luckily, we gained the needed knowledge in the related field as well over the many years on the one side and on the other side we can construct now a module after our ideas, which will be the next hammer.
Ontonics, Roboticle, and Style of Speed Further steps
The safety drone can have at least one electric motor
centrally arranged in the fuselage or
in each arm that connects a Loop Fan or Ring Fan with the fuselage (see the images of the bladeless fan or air multiplier based on inducement of the company Dyson)
to provide air to the Loop Fans or Ring Fans.
The advantages with a centrally arranged motor are:
more electric power efficiency compared with 4 smaller motors and
better realization of a noise-cancelling system,
as we also explained in relation with our multivector aerial vehicles some years ago.
In addition, the capsulation protects the electric motor and the blade(s) against dust and damaging impacts.
© Dyson
Roboticle Further steps
C.S. created two images of our Quadvector Safety Drone technology (see also the Further steps of yesterday) as Delivery Drone based on the original and unique design series Quadrovector, Flying Rings, and Flying Loops of C.S..
The second image is more meant as a conceptual depiction and shows a heavy-duty transport drone.
© Navid Baraty, :I, :(, Roboticle, and C.S.
Now it should also be clear how the fourth Personal Reconnaissance System (PRS) mentioned in the Further steps of the 13th of September 2016 looks like, which is also used for our Super Warrior platform developed by Ontonics (see for example the issue #6 publicated on the 13th of September 2016).
Furthermore, we were asked by C.S. if designs of Multivector drones with the Loop Fan are interesting as well (see also fans with long hole of the company Dyson). For sure, they are since years.
Style of Speed Further steps
We took the new Safety Drone of the business unit Roboticle with its absolutely outstanding design created by C.S. for our Flying Robots.
Investigations::Multimedia, AI and Knowledge management
Microsoft: This time the investigation is about a service for cognitive functions that the company Microsoft is providing now. Specifically, the integration with other hardware and software items is problematic, for example by providing an application programming library for its operating system, in relation to the multimedia works of art Ontologic System and Ontoscope of C.S.. See the Clarification #2 of today for further explanations.
16.September.2016
Comment of the Day
Quattrovector
Ontonics Further steps
We have started our new project called Chandelier internally, which integrates elements of two different technologies of us in an interesting way.
Roboticle Further steps
As announced yesterday, C.S. has drawn images of Multivector drone models with the Loop Fan. In fact, this is an old concept of C.S..
The images show two basic models each in two variants with the Loop Fans mounted to the fuselage in an angled way and in an angle of 90°, and with longer and shorter outriggers.
© Dyson, :I, Roboticle, and C.S.
Please keep in mind that the shape of a Loop Fan can be arbitrary. But in relation with the design series Quadrovector of C.S. it does not matter at all, because it is already original and unique.
Furthermore, the Ring Fans and Loop Fans can also be used as vectoring nozzles of our Multivector technology. The image below shows a quick and more conceptual sketch of the Quadvector with its short outriggers angled by 90° and its Loop Fans turned in forward (or backword) flight mode, and with an Ontoscope and landing gear.
C.S. had so much fun drawing the images that further models have been created with Ring Fans and Loop Fans.
The following 4 models are symmetrical in both directions. See the related Quadrovectors in the Further steps of the 13th of September 2016.
© Dyson, :I, Roboticle, and C.S.
In this relation, we would like to make the following suggestion: Every state governor in the U.S.A. who makes our Safety Drone technology mandatory for public use, such as delivery drones, transport drones, taxi drones, inspection drones, etc., gets 500 jobs and another 500 jobs by letter of intent in the beginning.
Further options are available. Subventions like the other companies got are mandatory.
Yes, we can lobbying as well.
Style of Speed Further steps
We developed a module out of two components.
17.September.2016
Ontoscope Further steps
We used one of the many original and unique functionalities of our multimedia work of art Ontoscope to realize two new functions.
Roboticle Further steps
We continued the work on the robot system reported in the Further steps of the 4th of August 2016. This comprised the overall architecture and the exterior design.
Now we are beginning to think about the start of its production.
Investigations::Mulltimedia
Google: After that company Google already jumped on the bandwagon of arts, specifically visual arts or fine arts and here again painting, because these are more the areas in which C.S. is active, it also extended its activities and included culture as well. As if that company would have something related with culture.
Investigations::Multimedia, AI and Knowledge management
Google: We learned recently that that company Google is extending the functionality of the already copied Intelligent Personal Assistant (IPA) from the original and unique multimedia work of art titled Ontologic System and created by C.S. with functions of its online mapping service after we described such a service in the project OntoGlobe/OntoEarth, which is also referenced in the section Earth Simulation/Virtual Globe of the webpage Links to Software of the website of OntoLinux, and mentioned it in relation with our Ontologic Web (OW) and the specific online mapping service Here.
And we are very sure that this is by far not all.
18.September.2016
Originals vs. Inspiration
Massachusetts Institute of Technology Project Jacke& or Jacketx (around 1999)
© Massachusetts Institute of Technology
Btw.: A special project of that company Google is not about a stereoscopic camera with additional sensors. This is the original and unique multimedia work of art titled Ontoscope and created by C.S..
That imitation of Google and Lenovo has only a light source, that sends out light points, and a camera, that records the reflection of these points when they hit an object.
19.September.2016
Comment of the Day
Sicherheitsdrone
Swiss army drone
US army drone
Roboticle Further steps
Created by C.S. straight for the C.S. Collection or another museum: The Swiss Army Drone and the US Army Drone, which come as quadrocopter with foldable rotors and as quadrovector with foldable Ring Fans or Loop Fans (see the Further steps of the 13th, 14th, 15th, and 16th of September 2016).
For sure, the Swiss Army Drone and the US Army Drone have a sophisticated Ontoscope on board.
And here are first sketches of the Swiss Army Drone Large with the outriggers closed and opened. This will become the variant with the Loop Fans.
© :(, Roboticle, and C.S.
C.S. also made a first sketch of a smaller Swiss Army Drone.
© :(, Roboticle, and C.S.
Furthermore, while we are already at foldable drones, the doodle below approaches the final sketch of a drone with foldable outriggers and Loop Fans as part of the original and unique design series Quadrovector of C.S..
© Dyson, :(, Roboticle, and C.S.
20.September.2016
Comment of the Day
Swift army
Roboticle Further steps
C.S. made two images of the foldable Quadvector shown in the Further steps of yesterday.
© Dyson, :(, Roboticle, and C.S.
Style of Speed Further steps
We tried another front section of our 9x9 and 91x series. Despite that the result is not convincing, it confirms an already known detail and helps us in the selection process.
We also created the second dashboard design for our 9x9 and 91x series.
21.September.2016
Ontologic Web Further steps
We integrated an application framework and a computing framework, and added the result as our next Ontologic Web (OW) environment.
Ontoscope and iRaiment Further steps
We would like to show some basic designs for our iRaiment Smartscarf and Ontoscope Smartsnake series (see also the Further steps of the 4th of August 2016).
© Burberry
Oh, yes, do not forget to mention: Original and unique, powered by Ontologics, and protected by copyright and patent.
Roboticle Further steps
We are thinking about the presentation of our Quadvector Pro model, which is derived from the original and unique sculptural art and design work series titled Quadrovector and created by C.S., and related devices, attachements for professional photo and video cameras, and additional equipment of our other business unit Ontoscope, as well as much more unrivaled features.
For sure, we do have several series of Lego® Quadvectors in the OntoLab as well, including the Racer and Speed Champions, Technic, and Mindstorm product lines, which have at least one more feature besides the Ring Fans and Loop Fans that will amaze the youngsters but also the older ones.
Dear girls and boys, parents, as well as professionals: Please wait with your next buy until we have fascinated you with our devices.
Style of Speed Website update
In the course of the announced restructuring of our product range, we have ended the e-conversions Ettore, Ettore Competition, and Ettore Cabrio, and taken down their websites.
22.September.2016
Insult of the Day
"Stop stealing other people's ideas and claim it as it's your own.
[...]
Actually, just turn off your site. It is $hit with your pi$$ poor attitude. F#<& off.
Regards,
John Mark Vicente"
In particular, we marked his work as well, as we always do with work owned by others.
In general, we do not reply on such emails.
Ontonics Further steps
In relation with the device mentioned in the Further steps of the 15th of September 2016 we made a conservative design decision for our first model, which nevertheless is still quite impressive.
Ontoscope and iRaiment Further steps
Finally, we have the first sketches of our iRaiment Smartscarf and Ontoscope Smartsnake series without and with projector module (see the Further steps of the 4th of August 2016 and yesterday, and also the Original vs. Inspiration #1 of the 28th of June 2016).
© Burberry, :I, :I, iRaiment, Ontoscope, and C.S.
The final smartscarf and smartsnake models will be thicker and can be based on our iFlex and Flip-Flop technologies as well (see the Ontonics Further steps and the Original vs. Inspiration of the 9th of July 2014 and 23rd of July 2014).
In addition, we can also attach special models of our Ontoscope Flex series, like e.g. the modular variant of the model OOO (see the Ontoscope Further steps of the 11th of July 2014).
Now, we have more than enough power for our:
Ontoscope Holo (see the Ontoscope Further steps of the 20th of September 2014 and 28th of October 2015),
Head-Mounted Displays (HMDs) for
- Augmented Reality (AR),
- Virtual Reality (VR), and
- Mixed Reality (MR),
Mobile High-Performance Computing (MHPC), and
all the other really cool stuff as well.
The emperor's new clothes? No, the emperor's new intelligent raiment (iraiment).
Oh, what ...? Copyrighted, patented, and patent pending!
23.September.2016
Comment of the Day
Diesel? Yes please" [C.S., Yesterday]
"Diesel? Ja bitte", [C.S., Gestern]
Ontoscope and iRaiment Further steps
We played a little around with our iRaiment Smartscarf and Ontoscope Smartsnake series (see also the Further steps of yesterday).
© Burberry, :I, :I, iRaiment, Ontoscope, and C.S.
We will try other sizes of the projector lens, configurations, and designs.
Style of Speed Further steps
After we revolutionized the car with the Automobile 2.0 and Automobile 3.0 with our original and unique hardware and software technologies, like for example our
Ontologic System (OS) with its integration of Total Quality Management (TQM) and Artificial Intelligence (AI),
Ontologic Net (ON) based on our OS
Ontologic Web (OW) based on our ON, as well as
Hyper Connectivity suite based on our OS, ON, and OW,
we are revolutionizing the land transport and logistics as well.
For making this happen we also developed a new Clean and Green diesel machine as replacement for the dirty engines built into larger trucks of other companies.
Attention: These technological developments are parts of the original and unique multimedia work of art Ontologic System and the overall work publicated as the website of Style of Speed, which is based to a large extend on the Ontologics System, all created by C.S., which were unforeseeable and unexpected by a Person of Ordinary Skill In The Art (POSITA) at the time of our publications and therefore do not constitute an ordinary technological progresses, but are protected by the international and national copyright laws.
Copying these works constitutes an infringement of the copyright, and diluting or creating a confusion about the origin of these works by reporting about them or using them for marketing activities without having allowance and giving proper account to C.S. and our enterprise constitutes an infringement of the law against unfair competition in addition to said copyright infringement.
24.September.2016
<>Style of Speed Further steps
Fits.
We would like to show a quick doodle of our model Style of Speedster.
© :I and Style of Speed
We also have the new exterior and interior design for the best 356 that ever existed.
But as we said in the past, this model might be merged with the classic model of the 9x9 series. See also the Style of Speed World Premiere of the 20th of December 2015 for related images of various 911 models with front boxer engine.
One revolution chases the other.
We reconsidered that
on the one hand our electric energy system Active Reactor can be constructed in any ways in respect to the size and modularity, and
on the other hand several automobile manufacturers sell their electric cars without battery, which has to be leased for a specific period of time by a customer.
Based on these points we concluded that a battery replacement kit based on our Active Reactor technology would be a gain for every entity involved:
The car manufacturers can decide if they
- build our Reactor directly into their vehicles or
- sell their electric vehicles to the correct prize free of the hidden costs for the battery or any kind of subsidies.
It will also level the competition, because in most cases the battery is financed by the bank that belongs to the same group of a automobile company, which smaller manufacturers cannot afford and provide as financial service.
Last but not least, the environment and in this way the societies would win as well, for sure.
25.September.2016
Comment of the Day
"Mistakes are always forgiveable, if one has the courage to admit them.", [Bruce Lee]
Honestly, Lee Jun-fan was not an idol for us when we got to know him the first time, that was at the time when the first movie of the Star Wars saga was shown. But as far as we know, he had a similar philosophy of life like Ingemar.
Style of Speed Further steps
In the last 3 weeks we worked on the designs of the frames with rear suspension for the bicycle model Omega with electric motor (see the Further steps of the 18th of August 2016) and for one of the recumbent bicycle models with electric motor shown in the Further steps of the 26th and 27th of August 2016.
26.September.2016
Comment of the Day
KineticCrown
KineticBezel
Smartbezel
iRaiment Further steps
We have begun with the presentation of one of the announced new multimedia work of art series created by C.S., which is based on our signature MobileKinetic 2D and 3D user interface, which again we developed for finger, eye, and head tracking as well as gesture control of mobile device (see also the project KineticWatch).
The work of art series might become the name MobileKinetic or Lovely Eyes. See also the model 03 Blue Eyes presented in the Further steps of the 19th of March 2016.
The first images of the models 222 II (see the Further steps of the 7th of September 2016) and P6 II (see the Further steps of the 8th of September 2016).
© Vacheron & Constantin, :I, and iRaiment
The next model is the Cyberroyal II with accumulator band in the NATO style (see the Further steps of the 10th of September 2016).
© Smart Turnout and iRaiment
We would also like to show interesting versions of our Smartbezel with MobileKinetic (patent pending).
The first one is the T6 with a polished case, a Smartbezel, integrating a second digital watch and MobileKinetic components, and an accumulator band in leather. If looked closely on the image little elements can be seen, each comprising an LED and a small image sensor. In this example we have only added such elements at the 5, 10, 15 etc. minute marks and a slightly larger front camera at the 0 minute respectively 12 hour mark. At the other minute marks either such an element can be placed or only an LED. Needless to say, the LEDs should also function as second watch.
For a more esthetic appearance we mirrored the cover glasses of these bezel elements, but they can also be dark as known from smartphones for example.
© Bremont and iRaiment
We are also working on models of the series that combines the Thin Watch series with MobileKinetic series as announced in the Further steps of the 9th of September 2016.
Let us see what else we can ditch. It is just the beginning.
Style of Speed Further steps
Since some weeks, we are also working on sedans, like for example the model Sweet 16 specifically made for our fans in the U.S.A., which is a shorten and electrified variant of the concept car Sixteen of the marque General Motors→Cadillac.
The front section is not in the shape as we want it, but the rest looks quite pretty.
© General Motors and Style of Speed
In this conjunction, we would also like to show a potential realization of a dashboard based on our Multi-Layer/Stacked Display 2.0 (MLD 2.0) with Kinetic User Interface (KUI), including eye and head tracking as well as gesture control (patented and patent pending) as part of our multimedia system Active Interior (copyrighted).
© General Motors
Attention: Our Multi-Layer Display (MLD) is exclusively available by Style of Speed. For using our MLD with KUI the use of one of our Ontologic Systems (OSs) and the basic package of our Active Interior are mandatory, which again requires further licensing. Costs of integration will be billed extra.
Achtung: Unsere Multischichtenanzeige ist exklusiv von Style of Speed erhältlich. Für die Nutzung von unserer MLD mit KUI sind die Nutzung eines unserer Ontologischen Systeme (OSe) und das Basispaket von unserem Aktiven Interior verpflichtent, was wiederum zusätzliche Lizensierung erfordert. Kosten für die Integration werden extra abgerechnet.
In the last weeks we also developed our next Active Motor for electric bicycles, which has many interesting features. In fact, it looks like a little revolution.
3³.3².2013+3¹
Comment of the Day
Cybersport
Ontonics Further steps
In the last two days we thought again about our new induction based wireless energy transfer technology mentioned in the Further steps of the 12th of July 2016 and concluded that we have not improved a foundational component only, but the foundational principal of this technology by up to 1 magnitude, which is incredible huge. Based on our preliminary estimations this means we should be able to transfer energy over e.g. 10 to 50 meters with the same efficiency as it is transfered over 1 to 5 meters.
Doubtlessly, this led to further implications, as the following examples show:
In the Style of Speed Further steps of the 22nd of July 2015 we already said that we optimized the irail and ipad technologies significantly. The interesting point is that said improvement has to be added to this optimization and other related developments of us.
In addition, said improvement also optimizes the foundation of the ibeam technology used for our Quickcharger technology presented in the same Style of Speed Further steps.
But we are also sure that it improves wireless data transmission as well by the same amount.
iRaiment Further steps
We designed a new smartwatch and Ontowatch model.
As announced, we have designed more models of our new subseries Cybersport, which belongs to our smart sport watch series, which again is related with our FitWatch series, with the Cybersport Race and the Cybersport Race S shown in the images below.
© Tissot and iRaiment
See also the models of the subseries C-Shock presented in the Further steps of the 11th, 13th, 14th, and 16th of October 2015.
Furthermore, we have designed two more new models Cybertempo I and Cyberfreak I, which belong to a new series with a more expressive and bold design language, which again we started with the model Cybercraft I (see the Further steps of the 29th of February 2016).
© Officina del Tempo, Ulysse Nardin, and iRaiment
Style of Speed Further steps
After we looked at some of our electric Active Motors, like for example our first and second electric motor for bicycles mentioned in the Further steps of yesterday and other related developments, we concluded that we can improve our Active Actuator and Active Cooling technologies, which is crucial for the steadily increasing overall electric power consumption of a modern vehicle.
Investigations::Car #400
Volkswagen→Audi, Daimler→Mercedes-Benz, and Bayerische Motorenwerke→Here Global: Some months ago, the three vehicle manufacturers joined as a consortium and took over the mapping and navigation products and services Here from the company Nokia. We knew directly at that time that the companies will use Here for adding the related computing platforms of the Hyper Connectivity suite and other Computing and Multimedia systems of Style of Speed, such as the original and unique
multimedia work of art Ontologic System (OS), including real-time capable OS platforms such as OntoLix and OntoLinux,
multimedia work of art series in relation with crowdsourced, postprocessed, and shared geographical data and shared pictures, that combines an online map with geographical data and images taken by a camera or a vehicle of a user, and
overall work represented by the website of Style of Speed, specifically the
that were all created by C.S..
As not expected otherwise, the vehicle manufacturers did exactly this recently as part of illegal acts of copying, unfair competition practicing, and advertising by the combination of their mapping and navigation products and services with a cloud computing based service, that is identically described like our related multimedia works of art and computing paradigms listed above.
Indeed, that bold approach to circumvent our copyright shows some smartness, but even if the consortium has added a range of many other sensor data besides the optical sensor(s) respectively camera of a vehicle and only takes images of traffic signs and other objects with the camera, it nevertheless still needs and wants to use essential parts of our copyrighted system, specifically
the integration of
- an online map,
- the position of a vehicle, and
- images about the environment (including traffic signs, etc.) taken by the front camera of a vehicle
by the simultaneous application of the paradigms
- cloud computing and
- swarm intelligence.
The copyright is valid, because obviously this highly complex system development respectively vision of a technological system and its applications described by C.S.
is
- original and unique,
- expressive, and
- was not foreseeable.
and
started the discussion of the aspect of e.g. swarm intelligence exhibited by some kind of a crowdsourced or community driven activity.
We made this clear already in the past with similar solutions presented by the
- companies of navigation and mapping products and services
- Tomtom (see its case in the Investigations::Multimedia of the 29th of April 2011) and
- Nokia→Here,
- manufacturer of audio products
- Harman International Industries (see its case in the Investigations::Multimedia of the6th of January 2016),
- and manufacturers of vehicles
For non-experts we would like to give the explanation that commonly the protection of an idea is not covered by the copyright, but the patent. But we have not given the allowance to take our descriptions and expressions as blueprints for a description or/and a realization or expression of the same idea in a different way in whole or in part, which can comprise an implementation of such a system if it expresses the same.
In addition, we emphasize the attempt to circumvent our copyright and the long time it took to come to such a solution as acknowledgements of its validity.
Besides, diluting or creating a confusion about the origin of these works is not allowed by the law against unfair competition.
As we said in the last past, this will not work but also worsen the position in further negotiations in relation with the many upcoming new technologies and improvements significantly.
28.September.2016
OntoLix and OntoLinux Further steps
We added a new compositor shell to the Ontographics component called Bizland or Proland. As the name suggests it is specifically developed for professional tasks supported by using wearable computers.
Style of Speed Further steps
In the Further steps of the 26th of September 2016 we reported that we developed our next electric motor for bicycles. Since then we continued with its further development, because we found the usual initial problems. But as we solved these problems this electric motor model has become better and better.
29.September.2016
Ontonics Further steps
We developed a new variant of a display technology, which could become a standard.
iRaiment Further steps
We renamed the model Thin Watch II presented on the 8th of September 2016 to its correct name Cybercord I.
As announced in the Further steps of the 9th and 26th of September 2016, we would like to present our new smartwatch and Ontowatch model Thin Watch II with KineticCrown based on our MobileKinetic 2D and 3D user interface technology.
In the left image below, the MobileKinetic modules can be seen in the corners of the display frame when looked closely at it.
The right image below shows the Thin Watch II with KineticCrown and KineticBezel respectively SmartBezel with MobileKinetic.
We made the MobileKinetic modules a little brighter in both images, so that they can be seen better. With the final product they will be as dark as the display module.
© :I and iRaiment
Between the MobileKinetic modules is space for e.g. LEDs to realize a second digital watch with binary time indication for example.
The next images show the Thin Watch I with a second digital watch in the modern LCD style, which has its digital indicator elements placed either at the top or the bottom of the display frame.
© :I and iRaiment
For sure, many other elements and designs of the MobileKinetic and second display modules are imaginable, as it is the case with the displayed information, which has not to be the indication of time.
30.September.2016
Ontonics Further steps
We have developed a first special material based on the p-n junction.
After we saw the basic functioning of this first material in more detail, we have designed a concept of a second special material in a subsequent step.
Because these new special materials constitute a new class, we considered names like Powerinium for example.
iRaiment Further steps
For our Ultra Thin, Ultra Slim, or Ultra Flat series we designed the new model Cyberplano II DD with KineticCrown and KineticBezel.
© Danish Design and iRaiment
Obviously, not the operating system is decisive, but our multimedia works of art Ontologic System (OS) and Ontoscope as well as our smartband and smartbezel technologies.
Roboticle Further steps
We are ready to start our original Delivery Drone service with our special Safety Drones, that will convince every lawmaker and governmental institution once we have presented the Unmanned Aerial Vehicles (UAVs) and the complete systems/technologies.
We also developed a new robot model by replacing a part of an initial robot model with a module.
Style of Speed Further steps
Together with the other business unit Roboticle we have developed the next generation of our Autobot robotic platforms with K.I.T.T. 2.0 and K.A.R.R. 2.0.
Members of our Inner Circle of our Ontologic System (OS) can get detailed informations under the common NDA and in this way important competitve advantages.
We also designed 3 models and 1 model in 3 variants of aerial vehicles, which are very interesting.