In this relation, we have contacted an author, who publicated a report about that bold plagiarism in November 2016 on the website of the magazine IEEE Spectrum edited by the Institute of Electrical and Electronics Engineers.

02.February.2017
Comment of the Day
Magic cloud™

Clarification
We found a concept of an aircraft with an electric propulsion system that should be powered by a nuclear battery based on the isotope hydrogen-3, also known as tritium. Sometime ago we took a look at this technology and got the following informations:

Atomic batteries use radioisotopes that produce low energy beta particles or sometimes alpha particles of varying energies.
In the diode design, radioactive material sits atop a device with adjacent layers of p-type and n-type silicon, so that ionizing radiation directly penetrates the p-n junction and creates electron-hole pairs, which is comparable to the working mechanism of a PhotoVoltaic (PV) cell or solar cell.

The McDonnell Douglas Betacel 400 used for powering pacemakers had promethium-147 isotopes sandwiched between semiconductor (p-n junctions) wavers. It had an open-circuit voltage of 4.7 V (the common lithium-polymer battery used in mobile devices provides 3.7 V) and a short-circuit current of 115 μA (10^-6 ampere). A load of a 200 kOhm resistor could be powered for 10 years. The power density of the battery was approximately 25 microwatts (10^-6 watt) per cubic centimeter. The battery itself was approximately one cubic inch in volume (16.4 cm^3).
These Betacel batteries presented an efficiency of approximately 4%. Higher efficiency devices were in the development process utilizing bidirectional beta sources, that would have yielded efficiencies approaching 8%.

Two of the best known atomic batteries for common use are made up of a metal foil impregnated with tritium isotopes and a thin chip with p-n junctions made of the semiconductor silicon carbide, which can convert 30% of the beta particles that hit it into an electrical current.
When we stack up chips and foils into a package a centimeter squared and 2 millimeter high, then we have a 1 microwatt battery. Powering a smartphone or even a vehicle with this technology seems to be illusory, obviously.

But the very low output is not the worst problem. Many isotopes

These disadvantages led us to the development of various reactors and other interesting devices that are more user friendly so to say.

Ontonics Further steps
We have started a new project that will generate interesting results.

We also have developed another battery.

iRaiment Further steps
We improved a relatively new device of us.

Furthermore, we solved a potential problem with a special smartband model, which is even much better now than we have ever expected. Really, no marketing nonsense here.

We developed another basic smartband model, which should have at least 2 or perhaps even 3 times more electric power capacity than the 2nd generation (see the Further steps of the 31st of January 2017). But we expect an increase by a factor of 4 to 6, and more depending on the used chemistry.

We also developed another basic smartband model, which should have much more electric power capacity than our other generations by exploiting a new feature in a simple but clever way. Honestly, this is a development where we ask ourselves why we had not this idea before.

Roboticle Further steps
We worked on the next generation of our Minimaxi humanoid robot platform.

We also worked on a module that we can use for several of our robot platforms.

Style of Speed Further steps
We developed a second variant of a module for our coaxial helicopters but tests must show if it is an improvement.

In the last days we worked on 3 projects:

• we gave the work title Hightech,
• is based on the WL1 Wide and Low Body in the variant with all wheel housings closed, and
• constitutes a continuation of the design of the models Modern and Abstract.

• our model Z1,
• the WL1 Wide and Low Body, 9x9 Hightech model, or both models, and
• some parts of other vehicles.

In the last days we continued the work on our:

which both have entered the prototyping phase and the beta production phase.

Style of Speed gives you Speed.

03.February.2017
Ontonics Hovercity #1
We are pleased to announce the official start of our project Hovercity that is about the change urban areas will pass through by their continued transformation from 2D to 3D through the use of our material class Hoverinium as well as techniques, technologies, and services, that will change everything, as we already did with our Ontologic System and Ontoscope as well as the Invention of the Automobile 2.0 and 3.0 among many other original and unique works of arts created by C.S. in various disciplines.

Some examples for this profound and revolutionary transformation are:

• new techniques (e.g. heavy lift airships, aircranes, or skyhooks, and hovercranes),
• new materials,
  • carbon fiber concrete,
  • Powerinium,
  • Flexinium,

• new shapes,
• higher structures,
• integration with our 3D infrastructure called Superstructure (see the issue Ontonics Superstructure #1 of the 29th of October 2016),
• integration with our space towers and space elevators (see the issue Ontonics Space Elevator #1 of the 28th of February 2015 and #3 of the 19th of March 2015),

• horizontal and vertical,
• on the ground and in the air,
• individual and public,
• much more energy efficient,
• much more faster,
• revolutionary elevators,
• new railways,
• integration with our air transport services (see the Style of Speed Further steps of the 13th of January 2016 and the Ontonics Further steps of the 29th of January 2016),
• integration with our Highway in the Sky and Autobahn in the Sky (see for example the issue Pod and Swoop Racing League Further steps #18 of the 28th of February 2012),

• delivery drone service,
• hovering warehouses, stores, and drone motherships (see the Ontonics and Roboticle Further steps of the 19th of January 2017),
• hovering restaurants,
• flying vending machines,
• public services
  • police (see the Picture of the Day of the 22nd of June 2008),
  • fire brigade,
  • rescue,

Style of Speed Further steps
We designed very simple models of a taxi, a truck, and a maglev train (see also the Original vs. Inspiration of the 13th of August 2013) having a block of a Hoverinium composite as chassis. Needless to say that our hybrid hover technology is very energy efficient and therefore saves a lot of fuel.

For sure, we are also working on other aerial vehicles than the solid state aircrafts and airships. For example, for the construction of planes by using Hoverinium, Powerinium, and Flexinium as well as other advanced techniques and technologies we are researching the relations of design parameters such as

which are all connected with each other. The main goal is to find the ideal types of aerial vehicles and their configurations and designs depending on the balances between these parameters.

Meep! Meep! = = = = = = ==========(===((==(((=((((((O°

Investigations::Multimedia, AI and Knowledge management

For sure, this was said to deliberately confuse the public once again about the true origin of our OS and the included Ontologic Web (OW). But by doing so, the criminal journalist and analyst also showed

That said, we only need to look further to provide additional evidences.
It has to be noted as well that Amazon also infringes other rights of C.S. and our corporation by confusing the public for example.

04.February.2017
Comment of the Day
Hovercrane™
Hoverhook™
Axela™

Clarification in C.S.' own account
Around 20 years ago C.S. had a relationship with a young woman, Jessica C., for around 7 years. When somebody is searching for her by using the complete name as search input, then she or he will only find an actress of movies for adults so to say having the same name. We do not know if this actress has been named Jessica C. at her birth or has taken this name as her stage name for getting more internet traffic, or it is just another part of the plot to damage the reputation of C.S., though we have no bad opinion about the job and what the actress is doing.
The Jessica C. we are talking about is a graduated medical doctor. But if somebody is searching for a Dr. Jessica C*...*, then once again she or he will only find a Dr. Jessica C., who is not the former girlfriend of C.S..

Ontonics Further steps
We are pleased to announce Axela. Axela is a cloud computing based speech controlled assistant, which comes in two basic models with outstanding, totally amazing properties and adorable characteristics (see also the last point of the Ontoscope Further steps of the 31st of January 2017).

We also looked once again at a comparison of a solid state aircraft based on one of our Hoverinium materials and a hot air balloon and found three points that led to a surprisingly low difference:

The first 2 points make a significant, not to say, a huge difference. But even better we got more insight and flexibility in relation with the design of this material class and also found some variants already, which provide very interesting properties.

So now we are getting better and better into the subject again and have a second result with a lift force of around 220 to 500 N/m³, which means we are already in a range that allows us to realize our Magic Carpet, but the one out of the fairy tale books that is affordable even without Jinn. Are you ready to fly?

Btw.: 1 N = 1 kg·m⁄s² or simply set
1 kgf = 9.80665002864 N and
1 N = 0.10197162099998805 kgf
whereby kgf stands for kilogram-force, kilogram of load, or kilopond (kp).

We also developed two new Hoverinium composites, which might be more efficient respectively generate more lift force.

Style of Speed Further steps
Customers can make their reservations for our totally safe and cost effective Two-Phase-To-Suborbit (TPTS) and Two-Stage-To-Orbit (TSTO) air launch system, that is based on our Hoverinium materials and composites on the one hand and on the other hand is used by us to shoot payload and travellers into the orbit with our cargo rocket and X-3*/Little Star.

Roboticle Further steps

© Walt Disney

Specification
Features of the standard robohub or hub robot model Eve:

• display with animated eyes
• speech controlled assistant
  • 100s of roles with 1000s of skills
• smart clock

• Wireless Local Area Network (WLAN, aka. WiFi)
• relay

Options depending on model version:

• gesture control
• user tracking
• navigation

• follow you
• automatic recharging

The prototyping phase is reaching its end. Eve is soon available at Buy n Large or on the website of Roboticle.
See also see the section Robotics of the webpage Links to Hardware on the website of OntoLinux for the flying spherical space station robot called Personal Satellite Assistant (PSA) by the NASA.

Please keep in mind: Original and unique work of art, copyrighted, patented, patent pending, or/and patent queuing.

05.February.2017
Comment of the Day

Original
National Aeronautics and Space Administration (NASA), Personal Satellite Assistant (PSA) Type 3 (2008?)

© National Aeronautics and Space Administration (NASA)

The PSA was always one of our absolute favorite robots and also one of the reasons why we have developed Hoverinium (see also the Roboticle Further steps of today below).

Clarification
Hoverinium is an original and unique work of art series created by C.S.. We are not sure if it should be classified as new media art or/and kinetic art, though when viewed from the aspect of kinetics then C.S. has brought it to its most extreme limit, because it is about zero gravity and hence about zero motion in space.

The creation of Hoverinium was inspired by

• hover bicycle (see the Original of the 11.11.2007),
• Myskodil, which is a hot air balloon with a bed as gondola
• airplane with pedal drive,
• fantasy material called [unobta]inium and Konrad's special anti-gravity glue,
• ability to lift heavy items like her father and her horse, police men, thieves, pirates, and other persons, as well as dumbbells, and
• ability to fly a car by putting a little of Konrad's special glue into its tank and flapping with her arms,

and discusses

Ontonics Further steps
We are pleased to announce our hovering smart home device series including the world's first

that are based on the original and unique new multimedia, kinetic, and robotic work of arts created by C.S. (see also the Original of 13th of March 2008, the Ontonics Further steps yesterday, and the Roboticle Further steps of yesterday and today).

Hopefully, the reflecting blitz and resounding echo are sufficiently clear.

We are also pleased to announce our hovering furniture series including the world's first

We are also pleased to announce our Hovering Load Carrying Equipment (HLCE), which is a world first and includes

See also the related messages of the iRaiment and Roboticle Further steps of today.

We are also pleased to announce our hovering solar panel, which is a world first in the field of electric power generation. By combining photovoltaic cells with Hoverinium we can generate electricity wherever we are and wherever we want to.
To generate electric power in this way and amount was not possible before, because of many different physical, technological, and economical problems, which all have been solved by us (see also the issue Hovercity #2 of today below).
Specifically interesting becomes the technology when we use it to- gether with our Hovering Unmanned Aerial Vehicle (HUAV) platforms and as a part of robot swarms (see also the related messages of the Roboticle Further steps of today).

While the project Hovercity is focused on the infrastructure and the buildings based on the Hoverinium concept and technology (see the Ontonics Hovercity #1 of the 3rd of February 2017) these smart home device and design series transfer the Hoverinium concept on common items that can be found in and around buildings (see also the Clarification of today above).

We also developed three new Hoverinium composites, which should be improvements of the composites developed before.

In addition, we generalized a special service to widen the range of the target group and eventually to increase the count of customers.

Please keep in mind: Original and unique work of art, copyrighted, patented, patent pending, or/and patent queuing.

Ontonics Hovercity #2
We demand the governments to update any regulations that conflict with our Zero Gravity Manned Aerial Vehicle (ZGMAV) and Zero Gravity Unmanned Aerial Vehicle (ZGUAV) technologies based on our Hoverinium material class. Specifically the following rules have to be changed accordingly that are related with the

Usually, governments have to impose such deregulations if a reason for a regulation is not given or has become obsolete due to new developments. Otherwise we will let the courts do it.

Furthermore, we added our first hovering solar energy plant to our urban infrastructure (see also the related messages of the Ontonics Further steps of today).

Ontonics Super Warrior #12
We are pleased to announce our Hover Squad Support System (HS³), which includes our

We also added our

to the range of Super Warrior equipment items (see the related messages of the Ontonics, iRaiment, and Roboticle Further steps of today).

In general, we do not need machine monsters, robot dogs, and such alike, because we can do it in the mix and with true style and harmony.
In particular, we do not need roads, because we can fly.

OntoLinux Website update
In the section Robotics of the webpage Links to Hardware we substituted the link

with the link

See also the Original of today above.

intelliTablet Further steps
We are pleased to announce our hover(ing) tablet computer, which is the next original and unique multimedia work of art created by C.S. and based on the integration of

See also the Roboticle Further steps of today.

iRaiment Further steps
We are pleased to announce our Hovering Personal Load Carrying Equipment (HPLCE) system, which is based on our Hoverinium material class and much more world's first, and includes our

See also the related messages of the Ontonics and Roboticle Further steps of today.

Roboticle Further steps
We are pleased to announce our Hover(ing) Ontoscope, which is the next original and unique multimedia work of art created by C.S. and based on the integration of three other original and unique multimedia works of art created by C.S. that are the

See also see the section Robotics of the webpage Links to Hardware on the website of OntoLinux for the flying spherical space station robot called Personal Satellite Assistant (PSA) of the NASA, which is also shown in the Original of today, and the Further steps of yesterday.

For sure, we also use Hoverinium for the original and unique kinetic and robotic work of arts titled Lighter Than Air Hoppers and Walkers, and created by C.S. (see the Original #3 of the 24th of July 2008 and also the Original of 13th of March 2008).
Guess for what we developed Hoverinium in the OntoLab among other applications?

With our always Hovering Unmanned Aerial Vehicle (HUAV) platforms respectively hovering robot platforms, that are based on the

created by C.S. and realized in the OntoLab, we have overcome the biggest problem of this technology that is always keeping the device up in the air, which is a world's first when it comes to Safety Drones.
This astonishing property leads to various applications, like the ones shortly described in the following sections.

We are pleased to announce our Hovering Camera System (HCS), which is a world's first when it comes to aerial photography and video, including air-to-air photography and video.

We are also pleased to announce our newest Hovering Personal Reconnaissance System (HPRS), which is a world's first based on our HUAV and HCS platforms (read the Further steps and the issue Ontonics Super Warrior #7 of the 13th of September 2016).

We are also pleased to announce our Hover Delivery Drone (HDD), which is a world's first when it comes to aerial logistics, inclusive our delivery drone service and drone cargo airline, based on our Safety Drones and proprietary techniques and technologies.

We also developed the Floating Box, Flying Box, or Drone Box or Box Drone, which is an integrated automatic transportation and logistic system with which we have revolutionized the field of logistics once again. By using the box drone the requirements for a shelf and even a warehouse, as well as an additional transport vehicle are not given anymore. The item to be stored or/and transported is put into a box drone and it flys away to its destination and rests there wherever this is on e.g. planet Earth (see also the Further steps of the 15th of September 2016, Ontonics Further steps of the 4th of February 2017, Ontonics and Roboticle Further steps of the 19th of January 2017, and issue Ontonics Hovercity #1 of the 3rd of February 2017).

We are also pleased to announce our hover(ing) billboard, which is a world's first when it comes to poster and digital billboard advertise- ment based on our HUAV platforms.
See also the related messages of the Ontonics Further steps of today.

We are pleased to announce our Hovering Unmanned Aerial Vehicle (HUAV) swarm platforms (see also the related messages of the Roboticle Further steps of the 30th of March 2015 and 26th of December 2016).

Quadcopter is so boring 20th century technology.

We are also pleased to announce our hover(ing) (wheel)chair and hover(ing) harness without or with exoskeleton, which both are a world's first when it comes to mobility aids of this type.
See also the related messages of the Ontonics and iRaiment Further steps of today.

These movement assistances should make life much easier for persons, who have only one or no legs, are paralyzed, or cannot use their legs for other reasions, until others or we have finalized the techniques to make new legs and solder the spinal cord together again. For sure, we make it as affordable as possible.

Style of Speed Further steps
We developed a new model of an engine, which is extremely powerful for its size and also very efficient.

06.February.2017
Ontonics Further steps
We improved a first service.

We extended a second service.

We also started a new service of one of our new business units after we developed a single application and then generalized the whole concept.

We also improved a device to provide more possible applications.

Ontoscope Further steps
We improved a technology, which was already excellent but now it is even better.

Where is the competition? :)

Style of Speed Further steps
Since we started the work on our Autocopters and Speeders, we are asking us when the time will come to ditch the wheel.
In the last days, we asked us if we should ditch the wheel and stop the work on our wheeled automobiles, because we made science fiction a reality.
Today, we concluded once again that a hovering device with wheels or wheeled landing gears, or other kinds of ground based movements (e.g. magnetic levitation) makes sense (see also the Further steps of the 3rd of February 2017), because

at least for the first generations.

But somehow we view more and more the wheel based locomotion or rolling as an aid for movement than its main way (see also the Further steps of the 2nd of February 2017).

Furthermore, we took another look at the new engine developed yesterday and tried to estimated its performance more exactly. Sadly to say, we are not able to give some numbers, because of the many different configuration options. But it looks very much as if this engine changes everything as well, like before for example the Ontologic System, Ontoscope, Carbon based Quantum dot Light Emitting Diode, and Hoverinium material class all developed in the OntoLab as well.

07.February.2017
Comment of the Day
Hover truck™
Hover container™

Ontonics Further steps
In the last days, we also worked on the production processes of our Hoverinium materials and composites, and our applications based on them.
In the course of this, we found out that we can (re)use a special production process directly.
We could confirm once again that the dimensions and other properties of devices based on Hoverinium are lying in the expected ranges and are even leaving roam for optimizations depending on the requirements of a specific application and device.

We also thought about the dimensions for (semi-)final mass products and prefer tiles or panels in the shapes and sizes of e.g. display panels, specifically with a square area. For sure, these tiles can be combined together to form a large tile if needed, which also follows the example of displays.
But in general arbitrary shapes are possible as well, as we have already designed in the shapes of chassis, fuselages, wings, and other exterior parts of vehicles, and will manufacture for our business division Style of Speed and our collaborating partners.

Roboticle Further steps
In relation with our pursuit to revolutionize logistics once again and our box drone (see the related message in the Further steps of the 5th of February 2017), we are also thinking about a standardized shipping container respectively hovering container in the size and shape of an intermodal container.
But potentially a hover truck, a hover tug, and a hover trailer are sufficient.

Style of Speed Further steps
We will stop our activities in relation with the common automobile. Seriously, it is neither interesting nor making sense for us anymore.

In this context, we have reviewed our internal records and after we only created and constructed single materials, composites, components, and modules all the time, we began only recently to put everything together and to make the first calculations of the overall performances of our newest technologies and their applications. About the results we can only say that they are mindblowing and not communicable to the public.

We may also stop our activites in relation with the rotor for the same reasons and in the same way as discussed in the case of the wheel (see the Further steps of yesterday).

08.February.2017
Ontonics Further steps
We continued the work on the integration of our

Sufficiently original and unique?

OntoLinux Website update
We have begun to translate the document Ontologic System Calibre Ontoscope into English and to add a first additional note in the new section 1.7 More Notes, which will be merged into either this document at a later point in time or a new document that discusses the subset of the Ontologic System comprising the connection of horology and artificial intelligence in more detail.

Note that such documents are collections and amalgamations of material, which are based solely on contents publicated in the many years before on our websites, specifically on the website of OntomaX.

09.February.2017
Ontonics Further steps
We optimized a module. If the supplier of a component is right, then we should achieve a significant improvement.

We also began to develop our own color e-paper, because the market is not able to fulfill our requirements since 15 years and we do not want to wait anymore. Our fans and friends as well as the collaborating business partners will be impressed what is possible.

iRaiment Further steps
We were surfing around in the World Wide Web and suddenly we had developed a new smartwatch model concept, a new model of a first feature watch or hybrid watch model series, a new model of a second feature watch or hybrid watch model series, and a new model of a third feature watch or hybrid watch model series.

10.February.2017
New crowdfunding fraud
This time the defrauding entity is trying our legal defense from the direction of our multimedia environment Sp@ce, including Space@Home, which is powered by an Ontologic System (OS), like for example OntoLinux, as it is the case for all of our devices, environments, services, systems, etc.. The latter fact has been made crystal clear on our websites over the last 10 years.

Specifically the features of proactivity in connection with learning the user's habits or some other kind of reflection, logic programming (specifically "if this then that" or "if then else"), other AI, etc. on the one hand and AR, networking (specifically web services and distributed computing, including cloud computing), etc. on the other hand is always a very clear indicator for a copyright infringement, because it is one of the prominent honeypots laid out by C.S. (in this case on the webpage Ontologic Applications of the website of OntoLinux) for the fraudulent entities, who either have no clue about what they are truly stealing or are just only anti-social, serious criminal cleptomaniacs.

Potentially, somebody has to delete some patents.

Do not be fooled and verify yourself that we are the original.

iRaiment Further steps
We designed a new smartwatch and wrist-worn Ontoscope model.

We also worked on the design of a smartwatch and wrist-worn Ontoscope model.

Furthermore, we added a function to our wrist-worn devices that might be interesting.

11.February.2017
Ontonics Further steps
If we have not said it before, we can confirm once again the quantities and qualities of our Carbon (allothrope) based Quantum dot Light Emitting Diode (CQLED) devices and displays such as for example:

by at least 10.000 times, though the latest research shows even no relevant deterioration anymore,

• all kinds of materials or substrates, such as for example
  • polymer,
  • glass,
  • ceramics,
  • paper, and
  • wood,
• all kinds of shapes,

• inside and outside,
• dry and wet, and
• safety and security,

  such as for example

• buildings
  • window,
  • door,
  • facade,
  • swimming pool,
• vehicles
  • windscreen,
  • rear screen,
  • side window,
  • Head-Up Display (HUD),
  • door and bonnet,
  • fuselage,
  • wing, and
  • hull,
• consumer electronics
  • display,
  • wearable devices,
    • eyewear
      • smartglasses, data glasses, Optical Head-Mounted Display (OHMD), or see-through HMD,
      • (bionic) contact lens,

Indeed, this CQLED is also a wonder stuff. No marketing here but only the fascination of what can be done already today.

Even better, we can also confirm that we have all production techniques and technologies at hand and are able to begin with the prototype production.

In addition, we developed at least three new variants of a device with improved performance.

We also continued the work on a project and developed the second generation of a model or another model of a related device, which integrates the technology mentioned before with another interesting technology.
We are not sure at the moment, but it looks like that the foundational technologies and these modules and devices could start a worldwide change if not to say revolution.

iRaiment Further steps
We continued the work on a special model series of feature watches or hybrid watches.

Roboticle Further steps
We developed two new models of Minimaxi.

12.February.2017
Ontonics Further steps #1
We developed a new variant of a device with improved performance.

We also improved the performance of a technology.

13.February.2017
Ontonics Further steps
We developed at least two new photovoltaic cells, which have interesting properties and provide very high efficiencies, for sure.

We also developed a new variant of a device with improved performance.

Investigations::Multimedia

• tablet computers (e.g. intelliTablet),
• smartwatches respectively wrist-worn Ontoscopes (e.g. iRaiment), and
• smart eyewear (e.g. iRaiment and Ontoscope), as well as
• Augmented Reality Head-Mounted Displays (ARHMDs), Virtual Reality Head-Mounted Displays (VRHMDs), and Mixed Reality Head-Mounted Displays (MRHMDs) respectively head-worn Ontoscopes

(see its case in the Investigations::Multimedia of the 21st of February 2014 and 17th of June 2014, and also the Investigations::Multimedia of the 15th of July 2014).

In this relation the facts should be noted, that the Simultaneous Localization And Mapping (SLAM) method was also a part of the autonomous driving system of the winning vehicle Stanley of the Defense Advanced Research Projects Agency (DARPA) Grand Challange of the year 2005 and that we already have

Around the year 2014 we concluded at first, that for example the combination of a

• depth perception or depth sensing,
• (6-axis) positional tracking, and
• (large-scale and real-time) 3D mapping,

and

would be results of an ordinary technological progress (see the Clarification of the 29th of April 2014), but already mentioned that the additional combination or integration with Artificial Intelligence (AI) by our OS and Ontoscope could not be declared as an ordinary technological progress anymore. In fact, it was an attempt to draw a white line without saying the last word, and because our conclusion specifically in relation with the ordinary technological progress was partially incorrect, we made clear once again recently that already the smartphone was unforeseeable and unexpected by virtually everybody with the exception of C.S. and some fraudulent entities spying on C.S. and, as a simple implication, the smartphone with a dual-lens camera, 3D camera, or/and a 3D scanner or depth camera was unforeseeable and unexpected as well by really everybody else than C.S., as it is the case with the idea to put the navigation system of an autonomous off-road vehicle like Stanley and much more into a pocket computer, watch, or glasses, and advanced 3D camera technologies derived from the Ontoscope (see the Clarification #1 of the 23rd of May 2014 and Clarification of the 30th of January 2017).

Furthermore, we learned in the year 2014 as well, that the Tango platform of Google is based on the SLAM technique (see again its case in the Investigations::Multimedia of the 21st of February 2014). Now, we got also the confirmation that the SLAM technique:

• spatial awareness or space-awareness, and
• location awareness to
  • directly know and perceive the whereabouts of
    • itself, and also
    • a user using such a mobile device or agent,
    and even to
  • reflect a user.

These connections to

prove once again that at least such specific portable 3D camera technologies and devices comprising them, which include Goolge's Tango platform but also many of the other devices listed at the beginning,

Obviously, C.S. was all the time far ahead of the time or simply said truly visionary, original and unique.

In the following many of the relevant links in relation with the Ontoscope are listed:

The following links are related with smart eyewear and head-worn Ontoscopes, as well as smartwatches and wrist-worn Ontoscopes:

We have also found two more companies that seem to be fake companies of Google and its partners, such as e.g. Nvidia and potentially Audi and Robert Bosch, or are financially supported by Google at least.

14.February.2017
Clarification
An artist, whose doubt about reality is the foundation of all his works, presented as his latest work a mirror, that is said to show this doubt particularly clearly.

• reflection of the multimedia work of art titled Ontologic System and created by C.S., as well as the related description and explanation given in the document Ontologic System Calibre Ontoscope, and
• attack on said work and therefore on C.S., specifically on our trustworthiness.

Sadly to say, that artist has not only a profound lack of competence in the field of social behaviour but also in the field of physics, where it has been already discussed as well in the past if natural processes can be mirrored in time.

We have the physical theories of

But Einstein's theories are already sufficient to clear any doubts, because they comprise the laws of thermodynamics.

Another aspect is related with Algorithmic Information Theory (AIT), which is

• is described in The Proposal and supplemental documents written by C.S. as well and
• constitutes the predecessor of the Ontologic System (see also the Clarification of the 18th of December 2016).

Furthermore, this direct connection of thermodynamics and therefore statistical mechanics, and quantum mechanics with information theory, computability theory, and AIT, is another theoretical foundation of the Ontologic System (OS) with its Caliber/Calibre and Ontologic uniVerse (OntoVerse or OV), which describes for example the thermodynamics and quantum mechanics of cognition and cognitive processing and provides the foundation of many interesting appications (see the section Paving the Way by Bridging the Gap of the webpage Caliber/Calibre once again).

This means logically, that at least conceptually the OS is absolutely trustworthy and correct, and everybody who doubts our OS, ON, OW, and OV, or even reality on the one hand and on the other hand attempts to pervert reality is simply wrong or just mad.

Original and unique! And this is only the beginning. :D

Ontonics Further steps
We developed another new photovoltaic cell, which also provides a significantly higher efficiency.

As a by-product of another development activity, we developed our variant of a material, which must be the world's lightest material with an estimated weight of around 144 g/m² maybe less. The other properties should be in the desired ranges as well.

Innovation happens.

Roboticle Further steps
We designed a new Quadvector model.

Style of Speed Further steps
In the course of our next planned step of the development of Style of Speed mentioned and discussed in the Further steps of the 2nd, 3rd, 6th, and 7th of February 2017 we made several decisions explained in the following.

The airships will become more important comparable to yachts on water.
The planes have already Vertical Take-off and Landing (VTOL) variants and are continuing their evolution in this direction by removing the powered rotors.
The helicopters will disappear.
The Powered Lift Aircrafts will become either VTOL planes or Speeders.

The common land vehicles, specifically the cars, are already disappearing in favor of our Autocopters with new models, which are some other kind of flying cars that have no powered rotors anymore.
This transformation is realized by the next generation of the models B!, X0 and WL1 Wide and Low Body, and the models of the 91x series (see for example the Further steps of the 11th of January 2016), and eventually leads to Speeders.
We have selected two more design concepts that show the general direction and path of this transformation.

© :(, :I, :I, :I, and Style of Speed, and Cava

See also the Original vs. Inspiration of the 9th of April 2009, read also the case of Edwin Conan in the Investigations::Car #199 of the 27th of November 2009, and see the Further steps of the 10th of January 2015, which prove the originality and uniqueness of the activities by SoS on the one hand and on the other hand that this transformation has been planned by long hand and is going on since at least the November of 2008 when we discussed the electric variant of the model B!.

15.February.2017
Some more thoughts about mobile HMDs and headsets
*** Sketching mode ***

While looking for some images in our archive to continue the discussion about the issue with

• stereo camera or/and
• mobile phone or cell phone,

and

from the point of view of our Ontologic System and Ontoscope (see for example Clarification of the 30th of January 2017 and the Investigations::Multimedia of the 13th of February 2017).

specifically Microsoft Hololens software in Windows operating system and mobile ARHMDs, VRHMDs, and MRHMDs (see its case in the Investigations::Multimedia of the 29th of January 2017)
specifically smartphones used as mobile ARHMDs, VRHMDs, and MRHMDs

So far we (might) have

Various views on the subject exist, but with every additional feature the white line drawn with the OS and Ontoscope is reached relatively quickly and becomes more and more clear.

• 3D depth camera outside ARHMD, VRHMD, and MRHMD
• MobileKinetic on or inside mobile ARHMD, VRHMD, and MRHMD
  • positional tracking of mobile HMD, mobile VR headset, etc.(?); when done with mobile phone or smarphone(!)
  • collision warning
  • wireless full body tracking
  • wireless hand control

Original vs. Inspiration #1
1. row: Henry McCollum, Stereoscopic Television Apparatus (15.April.1943), US Patent 2388170 (30.October.1945)
2. row: Morton Heilig, Stereoscopic Television Apparatus for Individual Use (24.May.1957), US Patent 2955156 (4.October.1960)
3. row: Ivan Sutherland, Head-Mounted Display (HMD) Sword of Damocles (1966) and Head-Mounted Three-Dimensional Display (1968); first Virtual Reality (VR) and Augmented Reality (AR) HMD system
4. row: National Aeronautics and Space Administration (NASA), VIrtual Visual Environment Display (VIVED) with Leep optics (1984 and 1985)
5. row: Jaron Lanier et al., Visual Programming Languages or VPL Research, Virtual Reality Head-Mounted Display (VRHMD) EyePhone (1987)
6. row: Leep Systems, Virtual Reality Head-Mounted Display (VRHMD) Cyberface and LEEPvideo System 1 (LVS1) with Puppet head; first commercial HMD and telepresence VR system (1989)
7. row: Leep Systems, Puppet head with stereo cameras and binaural microphones, and Virtual Reality Head-Mounted Display (VRHMD) Cyberface2 with Telehead with remote dual-camera and binaural microphones (1990s)
8. row: Augmented Reality (AR) or Mixed Reality (MR) Head-Mounted Display (HMD) with personal video monitor, 2 webcams, head tracker, and headphones mounted on bicycle helmet








© :(, :(, :(, National Aeronautics and Space Administration (NASA), VPL Research, Leep, :(

The product designation EyePhone does not mean that a phone is included. But it was featured in the science fiction film "The Lawnmower Man" from 1992.

Original vs. Inspiration #2
Leep Systems, Wide-Angle Stereo Camera LC2002

© Leep

Ontonics Further steps
We are developing a cost effective method to produce graphene for example. Practical tests must show if we already have reached our goal.

We are also developing a cost effective method to produce quantum dots used for the production of displays for example. Practical tests must show if we already have reached our goal.

Furthermore, we developed a new photovoltaic cell, which is based on the photovoltaic cell technology mentioned in the Further steps of yesterday and potentially quantum dots with the goal to realize the best compromise between effectivity, which should be doubled to around 50% at least, and cost, which should be halved.

We adapted a technology to improve our Virtual Reality Environments (VREs) Holodeck@Home and Holonicle::Deck. Absolutely cool and another masterpiece of C.S..

Ontoscope Further steps
We improved a Head-Mounted Display (HMD).

16.February.2017
Comment of the Day
"Think Big."

17.February.2017
Clarification
By the way, our new hover technology can fly very long distances, transport tons of load, will get certification worldwide, and is affordable in construction, maintanance, and scrapping.

Ontonics Further steps
We are pleased to announce our new scalable technology developed for mobile devices, such as our Ontoscope and intelliTablet, as well as other devices where folding or rolling (see for example the Original vs. Inspiration of the 27th of December 2015) are not the best choice of method (e.g. wrist-worn Ontoscope).
The image, which is presented below but not created by us, shows a design concept of a laptop computer, which is based on a scalable material with a scaling factor of around 3.5 to 4 and has surprisingly many features of our Ontoscope paradigm and technology.

© :)

The scaling factor of our devices will be around 2 to 3 times at first and we are researching how far the development of this technology should go respectively how high the scaling factor should be for still making sense.
The foundational layer has been scaled by spreading out and pushing together 100.000 times in the laboratory without showing any deterioration.

Moreover, we are in the design and prototyping phase of the final products and have also begun to prepare the production phase.
For sure, Scale devices have all common features, such as a rigid display with high resolution and touchscreen, cameras, and a battery with very long runtime.

Protected, patenting WIPO, etc..

18.February.2017
Comment of the Day
Scale
iScale

Ontonics Further steps
We have extended the range of services of one of our undisclosed business divisons by connecting it with the products of another undisclosed business divison.

While thinking about the two undisclosed business divisions and a technology used by both of them, we concluded that we have not maxed out this technology and developed its second generation. Future defining revolution.

In relation with our new scalable technology we thought about its correct designation and description of its functionality, because neither folding nor spreading out and pushing together seem to be the right terms to addresse these two points completely and correctly. That said, we came to the terms to scale and scaling, Scale, and iScale in accordance with the property of being scalable and correspondingly have updated the Further steps of yesterday.

iRaiment Further steps
We thought about a scalable smartphone and an Ontoscope of the new Scale model series designed like the Thin Watch I, Thin Watch II, or another model of this series (see the Further steps of the 19th and 20th of July 2016, and also 29th of September 2016).

We also thought about a scalable tablet computer and an intelliTablet with Ontoscope technology of the new Scale model series in the designed like the Double Watch No1 or another model of this series (see the Further steps of the 20th of March 2016, and 25th and 26th of May 2016).

We find these models very fascinating with which we are continuing to connect the world.

19.February.2017
Comment of the Day
"I believe that unarmed truth and unconditional love will have the final word in reality.", [Martin Luther King, Jr.]
We are wondering if M.L. King Jr. would still believe in this today. Maybe we have to say: What a dreamer.

Ontonics Further steps
We continued the work on the production of our Hoverinium materials and composites. It is truly fascinating to see physics in action in this specific way.

20.February.2017
Ontonics Further steps
We developed two variants of a technology and a third variant by combining them. Indeed, this is crazy technology but has the potential to become the next generation of another technology.

We also developed another cost effective method to produce graphene for example by adapting a technology.
We also thought to combine this method with the method mentioned in the Further steps of the 15th of February 2017.

Investigations

Investigations::Multimedia

• suggested and motivated the first time on the 6th of July 2007 and
• officially started on the 28th of February 2011

• voice control,
• head tracking, and
• gaze or eye tracking,

since we showed it the first time around 8 years ago on the 11th of July 2009, which were discussed on OntomaX many years ago as well (see for example the section that begins with "We demand all media" at the end of the Investigations::Car #345 of the 6th of February 2012).
Indeed, such multimodal user interfaces were already used with the second generation of wearable computers in the late 1990s and early 2000s (see also the section Zooming Text-Entry Interface of the webpage OntoGraphics of the website of OntoLinux), but their combination with softbionic techniques such as Artificial Intelligence (AI), Machine Learning (ML), and Evolutionary Computing (EC), and all the other properties of our Ontologic System (see for example the webpages Overview and Terms of the 21st Century of the website of OntoLinux) on the one hand and with a smartphone, tablet computer, smartwatch, or similar mobile devices on the other hand was only done by C.S. (see for example the case of the company Google in the Investigations::Multimedia of the 13th of February 2017).

Furthermore, the last quoted sentence was only publicated to provocate and psychologically terrorize C.S. with maximal impact.

21.February.2017
Ontonics Further steps
We adapted a technology to solve a problem, but honestly we do not know if this solution makes its way into a product.

We also worked on our Reactor technology and made some progress.
In addition, we developed some new detail solutions by exploiting the general properties of the overall system design.
When comparing our Reactor technology with similar solutions once again, we concluded that it should provide the significantly higher efficiency as announced by us.

Because somebody might still find a flaw in the concept of the overall system comprising the Reactor, we also looked from various directions at the whole range of chosen fuels once again.

22.February.2017
Clarification Industry 4.0 Special #1

*** Work in progress ***
For sure, we also observed the activities in the field of the so-called Industry 4.0, and knew directly from its start that our original and unique multimedia works of art titled Ontologic System and Ontoscope, and created by C.S. will be copied in whole or in part in illegal ways.
In the last days, we looked around for the first time and found a bunch of known and new fraudsters. In the moment we are sighting the material so that we can investigate the criminal actions and clarify the issues in a series of shorter Investigations and Clarifications.

To the terms that prove our claims belong "sensor", "cyber-physical system", "digital copy, digital twin, virtual instance, or model", "predictive maintanence", "self-awarness", and "self-healing", as well as "distributed", "cloud", and "services", because they do not pave a way to brake through our copyright protection, despite they have been chosen as prior art, but are composed to an integrated system architecture, which simply said is an essential part of our integrating Ontologic System Architecture (OSA), obviously, that therefore has been taken as a blueprint in an illegal way.

The facts are that we

Without any doubts there were

• Semantic (World Wide) Web (SWWW),

But missing were

which are the decisive factors that allowed to set free the synergy and in this way became someting totally new, unforeseeable, and unexpected. Exactly all these missing but most relevant aspects and elements have been created with our OS and OSA.

In addition, we can also see and conclude already like some few external entities did as well, that the problem is much too complex for all those already convicted fraudulent entities, who act like a swarm of headless chickens, so that

• who has stolen what at which time,
• what is missing,
• which promise or claim is missing, and hence
• where the red line is drawn and
• when our copyright has been infringed and will be infringed eventually (oh, we can also act predictively).

Every concerned entity should take the next months to clean up all infringing publications before we do so, send the bills, and beging the discussions with third parties (e.g. judges).
With friendly warnings
Mit freundlichen Warnungen

So we have sighted in more detail the 279 case examples listed on the website of that working group and made the observations that the

We also made a quick look on the titles of the case examples from France and Japan, which nevertheless provided us more informations about the subject and more insights about the issue.

Somehow we are getting the impression and also the proofs that C.S. is also the creator of the field of the Industry 4.0.

Investigations::Multimedia, AI and Knowledge management
*** Work in progress - text flow and rearrangement ***

We translated the quotes from the original report publicated in german language: "In the next decade, new business models will become possible on the basis of cyber physical systems. [...]", "The development and integration of new technologies and processes have contributed to this significantly. Remaining production sites means today to get into shape for the 4. industrial revolution driven by the internet. [We note that the 4th revolution of industry depends on the internet. ...]", "By the digital refinement of production plants and industrial products up to the everyday products with integrated data storage and communication capabilities, radio sensors, embedded actuators and intelligent software systems a bridge arises here between the virtual ("cyber space") and material world up to the mutual fine-grained synchronization between the digital model and the physical reality. [Bingo #1!!! Obviously, this was stolen form the webpages Overview and Caliber/Calibre of the website of OntoLinux, which is already enough to prove the copyright infringement and the other breaches of the rights of C.S. and our corporation. ...]", "In the development of these cyber physical systems it is already fallen back on the results of several successful research projects (Digital Product Memory) in Germany, its objective being the research and utilization of the technology trend for innovative products and solutions. [Here it is tried to construct a history that never existed and to present prior art for covering the stealing of our intellectual properties. Even if such research projects were conducted at the right times, they would not be sufficient to revoke the originality and uniqueness of our Ontologic System (OS). Quite contrary, those extremely suspicious research projects will be investigated by us as well in the future and we are very sure that we will get even more evidences for the various frauds of the past. ...]", "In this process of transformation the development of more intelligent monitoring and autonomous decision processes joins additionally to the even more increased automation in the industry (3. industrial revolution) now, for being able to control and optimize businesses and whole value networks in almost real time. [As we said, the cited prior art is not sufficient, because essential elements of our OS and OS Architecture (OSA) have been added later by using our works as blueprints. ...]", "This approach leads to a paradigm shift in the industry, whereby the resulting product takes an active role for the first time: Not a central control, but so to speak the blank for a product "says" how it has to be processed in the single manufacturing steps. [The emphasized word "says" is a clear reference to Natural Language Processing and hence to the Bridge from Natural Intelligence (NI) to Artificial Intelligence (AI), which can be found on the website of OntoLinux as well. ...]", "The resulting product itself controls the production process in this way, monitors the relevant parameters of the environment by the embedded sensor technology and triggers appropriate counter measures in the case of faults - it becomes simultaneously the observer and the actor. [See also the section Exotic Operating System of the webpage Links to Software of the website of OntoLinux and compare the latter statement with the statement "With the next accepted modern/universal model/theory [...] a human is able to look at the universe like she/he is on the outside of the universe but being inside." given in the Clarification #1 of the 14th of July 2009. ...]", "The vertical networking of embedded systems together with business application software provides considerable optimization potentials in logistics and production besides completely new business models. By the local autonomy of active digital product memories [... We note that the product is described like a software agent. ...]", "In this way, the products theirselves get immediate access to all higher-level process data and are able to accurately "decide" in every detail [... We note a further time that the product is described like a software agent. ...]", "Therefore the Internet of Things is complemented by the so-called "Internet of Services", because Smart Products provide their capabilities as intelligent services. This new generation of products is able to exchange informations independently over the internet by Machine-to-Machine communication (M2M), trigger actions and mutually control itself. [We note "internet of services" in the sense of Service Oriented Architecture (SOA), which was one of the attempts to copy our OS before we could publicate it, and some kind of an autonomous or independent agent system. ...]", "Only with semantic technologies the interoperability of all services, which come down on the novel cyber physical systems, are also ensured in open control loops. [Bingo #2!!! With this statement we get the fact that our connection of cyber physical systems with semantic technologies and services is declared as new in 2011 on the one hand and on the other hand another proof that the website of OntoLinux and hence our OS has been taken as blueprint. ...]", "For the access on the active product memories novel multimodal interaction paradigms are needed to open up the added values of the Internet of Things and the services as easy as possible to the user. [Bingo #3!!! Obviously, the further connection with multimodal user interfaces is an essential part of our OS. ...]", "The third industrial revolution, which was characterized by new materials, use of robots and central control systems, will be replaced in the next decade with the Internet of Things on the basis of cyber physical systems [... This statement underlines the originality and uniqueness of our OS.]", "Therefore the Communication Promoters Group of the Industry-Science Research Alliance of the federal government has proposed on the 25th of January 2011 in its recommendations for action the Future Project Industry 4.0. In the meantime, the future project has been adopted, [and] industry, science, and politics have already begun with the implementation. [...]".
And we have already started to do something due to copyright infringement and other illegal practices of the authors, the companies and institutes managed by them, as well as their partners in science, politics, and economy, and whatsoever.

• 5.3.1 Integration von realer und virtueller Welt==Integration of real and virtual world respectively the foundational cyber-physical concept with a digital twin, "virtuelle Instanz==virtual instance", or "Modell==model" of all "VDI/VDE GMA 7.21: Industrie 4.0: Gegenstände, Entitäten, Komponenten==Industry 4.0: Objects or things, Entities, Components", and also

• 5.4.1 Sensornetze
• 5.4.2 Intelligenz - Flexibilität - Wandelbarkeit

• 5.5.1 Multimodale Assistenzsysteme
  • Augmented Reality

• 5.6.4 Datenanalyse
• 5.6.5 Syntax und Semantik für Industrie 4.0

as well as the combination of the

• Konnektivität zu beliebigen Endpunkten==Connectivity to arbitrary endpoints
• Gemeinsames semantisches Modell==Common semantic model
• [Software Oriented Architecture (]SOA[)] als gemeinsamer Mechanismus für die Integration==SOA as common mechanism for the integration,

and

are infringing our copyright in relation with the Ontologic System (OS) and Ontologic System Architecture (OSA), because a subset of our OSA has been described only by using other words or even the same words, and therefore covered to a large extent in a top-down approach (see also the Clarification of the 8th of July 2016 and 18th of December 2016 for example).
In addition, we found more matches related with the overall approach, the process of creation, and the used techniques and technologies used for creation.

At this point we also give the warning that the reference model normed as the standard DIN SPEC 91345 is based on our intellectual properties and therefore its use for any machine, hardware and software, and product constitutes a legal problem.

In addition, we got the following information from a third party about the contents of two papers of him, that were publicated in the year 2013 and are about "The goal of predictive manufacturing system (PMS)[, which] is to enable machine and systems with "self-aware" capabilities. The core technology of PMS in order to deliver "self-aware" capabilities is the smart computational agent that will contain advanced analytics to conduct predictive modeling functionalities. [Obviously, this is an essential part of our OS, as can be easily proven with the content of the website of OntoLinux.]"

Furthermore, in a third paper publicated in the year 2014 the first time he discusses "Recent advances and trends in predictive manufacturing in Industry 4.0 environment". We got the following informations about their content from a third party: "Using appropriate sensor assemblies, various signals such as vibration, pressure, temperature, etc. can be recorded. [This reminds us of our Ontoscope and other devices of us somehow. ...] Such data can provide context as to the type of action/function the machine was performing when sensor data was being collected. Imagine when all data are gathered and combined with all the assets in a facility. When all the data are aggregated, this phenomenon is called "Big Data" because of the volume of data collected, velocity by which data is being received and variety of data that are being collated. Such phenomenon requires new paradigms and approaches for analysis instead of statistical process control or other traditional statistical analysis techniques. The new transforming agent then consists of several components: an integrated platform, predictive analytics and visualization tools. [...] By utilizing visualization tools, health information such as current condition, remaining useful life estimation, root cause, etc., can be effectively conveyed [...] The calculated health information can then be forwarded or made available to existing company management systems such as enterprise resource planning system (ERP), manufacturing execution system (MES), supply chain management system (SCM), customer relation management system (CRM), product lifecycle management system (PLM) to achieve overall enterprise control and optimization."

Moreover, in a magazine of a company, which will be investigated in the next future, we got also the following additional informations from a report that repeats the quoted part of the third paper: "After 2013 Hannover Fair took place in Germany, “Industry 4.0” is becoming a buzzword in manufacturing industry. Accompanying this new concept, intelligent analytics and cyber physical systems are teaming together to realize a new thinking of production management and factory transformation. [We note that Industry 4.0 is a "new concept" and the integration of intelligent analytics with cyber physical systems. ...] In order to achieve transparency, the manufacturing industry has to transform itself into predictive manufacturing. [We note the emphasizing of the property to be predictive.] Today, in an Industry 4.0 factory, machines are connected as a collaborative community. [We note the collaborative aspect.] Such evolution requires the utilization of innovative prediction tools so that data can be systematically processed into information that can explain the uncertainties and thereby make more “informed” decisions. [The term "evolution" points directely to our Evolutionary operating system (Evoos), which is described in The Proposal on the one hand and on the other hand is the predecessor and foundation of our OS. ...] Using appropriate sensor installations, various signals such as vibration, pressure, etc. can be extracted. In addition, historical data can be harvested for further data mining. [...] When all the data are aggregated, this amalgamation is called “Big Data”. The transforming agent consists of several components: an integrated platform, predictive analytics and visualization tools. The algorithms found in the Watchdog Agent can be categorized into four sections: signal processing and feature extraction, health assessment, performance prediction, and fault diagnosis. By utilizing visualization tools, health information (such as current condition, remaining useful life, failure mode, etc.) can be effectively conveyed [...]", "[...] prediction capability [... See the webpage Ontologic Applications of the webiste of OntoLinux.]", and "Industry 4.0 Factory [-] Key attributes[:] Self-Aware[,] Self-Predict[,] Self-Compare[,] Self-Configure[,] Self-Maintain[, and] Self-Organization [Here we got once again the link to cognitive systems, which are able to conduct self-reflection, and also the link to softbionics.]".
Obviously, the content related with the so-called Industry 4.0 approach was stolen from the website of OntoLinux with its OntoBot and OntoCOVE software components and further features (see also the Feature-list #2 of our OS OntoLinux publicated on the 24th of April 2008), and the connected systems listed on the webpage Links to Software that provide the foundation for Ontologic Applications (see also the Clarification of the 18th of December 2016).
We call such a person plagiarist and bad loser who came too late to the party. Convicted.
Important to note is the fact that citing the Watchdog Agent as prior art is not sufficient to question the originality and uniqueness of our Ontologic System, specifically in relation with the Industry 4.0 approach.

Obviously, he is talking about our original and unique work of art titled Ontologic System (OS), created by C.S., based on the Evolutionary operating system (Evoos; see The Proposal), including the Caliber/Calibre, and realized with OntoLinux for example.
This paper is not qualified at all to question the originality and uniqueness of our Ontologic System, specifically in relation with the Industry 4.0 approach (see the OntoLinux Website update of the 27th and 28th of September 2007 and 5th of October 2007), which proves once again our claims, specifically in relation with the so-called Industry 4.0 approach and similar approaches based on e.g. Cognitive Cyber-Physical Systems (CCPS of C²PS).

Bekannterweise ist nach 2 Jahren die letzte Frist Ende 2016 abgelaufen, innerhalb der sich alle Beteiligten um ein Lizenzmodell von uns bemühen konnten.
As it is widely known, the last period has expired at the end of 2016 after 2 years, within which all participants could strive for a license model from us.

23.February.2017
Picture of the Day
Aphroditus later Hermaphroditus meaning Aphroditus in the form of a herm (around 4th century BC to 2rd century AD)

© :(

A little lesson in art and culture has always a positive effect.

Clarification
In a report about a specific smartphone the following was said: "As to 3-D sensors, there is already one hiding in the [smartphone]. The front camera features what is known as a [T]ime-of-[F]light [(ToF)] sensor, which helps it autofocus and is used in numerous phones including [a smartphone series of another manufacturer ...]. That sensor could be upgraded to a higher-resolution version that could handle 3-D mapping for facial recognition, said [an analyst]."

Yes, it could but then it would infringe the copyright related with our original and unique multimedia work of art titled Ontoscope and created by C.S..
As we mentioned in the related Clarification of the 30th of January 2017 and the case of the company Google in the Investigations:: Multimedia of the 13th of February 2017, we are trying to draw the white line exactly at this point related with advanced 2D and 3D cameras as well. The quoted explanation addresses two interesting use cases, which always leads us to the conclusiong at first that such an advanced camera feature of a mobile phone or cell phone is legal.
But there are three arguments that are against such a conclusion more or less:

• In the first use case the ToF sensor is merely used to control the lens of a camera respectively the data captured by the 3D sensor is used without a semantic interpretation so to say.
• In the second use case the captured data is user data or application data used with a semantic interpretation so to say (see again the Investigations::Multimedia of the 13th of February 2017).

Ontonics Further steps
We began to think about it already on the 11th of February 2017 but only today we developed a new Hoverinium composite with an improved property: More power!
For being more precise on the one hand and on the other hand for our readers, who still are not knowing who Tim Taylor is, this means more lift force (see also the Further steps of the 4th of February 2017).

Roboticle Further steps
We worked on our new Zero Gravity Manned Aerial Vehicle (ZGMAV) and Zero Gravity Unmanned Aerial Vehicle (ZGUAV) technologies based on our Hoverinium materials and composites.
In a first project we continued with the integration of the Reactor technology of Style of Speed and the ZGMAV and ZGUAV technologies to provide electric power for propulsion and various on-board systems.
In a second project we continued with the construction of a Hover Delivery Drone™ (HDD) based on a ZGUAV that will be the result of the first activity (see also the Further steps of the 5th of February 2017).
In a third project we began with the construction of a prototype of our Flying Box or Box Drone (see the Further steps of the 5th of February 2017) that is used as a demonstrator to convince the federal aviation authorities in relation with the demands listed in the Ontonics Hovercity #2 of the 5th of February 2017.
In a fourth project we started the development of the hovertruck series of Style of Speed that was already mentioned in the Further steps of the 7th of February 2017 on the one hand and is based on the ZGMAV and ZGUAV technologies developed by the first activities on the other hand.

24.February.2017
Clarification Industry 4.0 Special #2
*** Work in progress ***
As noted in the past sometimes, for example in relation with the so-called Industry 4.0 approach, the field of the Semantic Service-Oriented Architecture (SSOA) was one of the reactions on the development of our Ontologic System (OS) and its Ontologic System Architecture (OSA) before their publication.

• service provider or service consumer,
• intelligent (personal) assistant, or/and
• integrated entity with virtual and real properties of the field of Cyber-Physical Systems (CPS).

At all this points we draw a white line.

Other entities focused only on the aspect of Object-Oriented (OO 1), model-based, and Ontology-Oriented (OO 2) Software Engineering (SE). But here we also found more or less the same deficits of an integrative approach as in the case of the entities behind SOA.

Even if one of these white lines or another white line not listed explicitly above has to be adjusted due to the existence of prior art or a reasonable combination of prior art, which we have not seen before our publications, the connection of all white lines respectively the integration of all addressed aspects to an integrated overall system proves the originality and uniqueness of our OS and OSA.
Likewise, taking a part of our OS and OSA, which is based on prior art that has been developed further in the sense of an ordinary technological progress, is not a legel strategy, because

which do not avoid a causul link, and because sooner or later this strategy of direct reflection does not work at all, because the OS and OSA were unforeseeable and unexpected.
Said in other words, nobody but C.S. ever thought about the possibility to make Tron or Kevin Flynn a worker in a production plant.

For sure, this does not apply only to the Industry 4.0 approach but also to similar activities, such as for example the Industrial Internet Consortium (IIC) in the U.S.A., the Industrie du Futur==Industry of the Future in the F.R., Industrial Value-Chain Initiative in Japan, and similar initiatives in the field of the so-called smart factory in the P.R.China and South Korea.

See also the related publications of the 22nd of February 2017.

There is no loophole.

Ontonics Further steps
We thought about the license model for what is called Industry 4.0 and smart factory. One approach would be to take the count of workplaces, the users or workers, and machines as the basis of assessment.
But this does not address the facts appropriately that

• in one case to a too high license fee for a machine and
• in another case to a too low license fee for a machine,

Btw.: We would like to give the reminder that the copyright is an international law.

Ontoscope Further steps
We developed an own variant of a module that can be used with our handheld Ontoscope models.

25.February.2017
Ontonics Further steps
We would like to give our fans and readers the information that we have developed a complete range of basic devices, systems, and equipment for generating and regenerating, transporting, and using our 21 Fuel in safe and convinient ways like it is done with the power grid, combustion engines run by common fuels, and rechargeable batteries.

With one device, called home station or home regenerator, owners of a mobile device with Reactor module can even do this at home (see also the Ontoscope Further steps of today).

In addition, we have continued to develop a so to say on-the-fly charger or regenerator, and a portable regenerator based on it (see the Further steps of the 18th of April 2016 and 13th of October 2016). Because these developments are in their earlier prototyping phases, we cannot give any other information than telling that they should work in minutes and not longer as fueling a tank or charging a device with the common technology.

We also made an estimation of the efficiency of this praxis ready technology, which is around 1.6 to 1.8 times of a system having the same dimension and comprising a fuel cell and a tank filled with Compressed Gaseous Hydrogen (CGH) (see the Further steps of the 14th of September 2016).
An estimation of the efficiency of a not so practical variant of this technology is around 3.4 times when compared with the hydrogen fuel cell system.

The 1 month running smartwatch, smartphone, tablet computer, and Ontoscope are comming, as promised.

Ontoscope Further steps
We continued the work on our Ontoscope Reactor™ model with its ultra compact Reactor™ module (see the Further steps of the 23rd of August 2016 and the Ontonics Further steps of today above).

Green? Supergreen!

26.February.2017
Ontonics Further steps
When we continued the work on our devices for generating and regenerating our 21 Fuel (see the Further steps of yesterday), we found out to our surprise that we overlooked a technology (see the Further steps of the 18th April 2016) and a feature of said devices.

We also utilized a technology to substitute another technology for a different application. Tests have to show if the efficiency can be increased by up to 15 times, but doubling it would be already a little revolution.

Ontoscope Further steps
When looking at the Ontoscope Reactor model and the variant mentioned in the Further steps of 24th of February 2017 once again, we concluded that their combined utilization might lead to a much longer runtime than estimated before. This is truly interesting and exciting.

Investigations::Multimedia, AI and Knowledge management

• infringement of personal rights of C.S.,
• infringement of copyright finally, because our original and unique multimedia work of art titled Ontoscope, which is operated by our other original and unique multimedia work of art title Ontologic System, has been copied further by LG Electronics following the top-down approach (see the Clarification of the 2nd of July 2016),
• unfair competition practice, because once again the public has been confused deliberately about the true origin of our Ontologic System and our Ontoscope (see the Clarification of the 2nd of July 2016, 14th, and 26th of July 2016), and
• illegal agreement, because Google and LG Electronics are business partners and work together in the Open Handset Alliance (OHA), also known as the Android consortium or Android cartel.

27.February.2017
Ontonics Further steps
We have developed the next model of our Axela series (see also the last point of the Ontoscope Further steps of the 31st of January 2017 and the Ontonics Further steps of the 4th of February 2017).

We also developed a new device by adapting another new device. Maybe it has been invented before by another entity. Nevertheless, absolutely amazing.

OntoLix and OntoLinux Further steps
We have improved one of our components, which will become a worldwide standard despite of not being available for devices run by another operating system.